Problem bei Wiederherstellung eines snapshots der VM
- karls0
- Unerledigt
-
-
Ich hatte das Problem noch nie, daher kann ich dir keine first-hand-Hilfe bieten. Aber ich konnte in anderen Foren Lösungen finden, die dein Problem, bzw den Error Code, behandeln.
Als erstes wird vorgeschlagen, den "virtual adapter" zu reseten. Das scheint in einigen Fällen schon Abhilfe zu leisten.
Eine step-by-step Anleitung konnte ich auch noch finden:
Mod: Nicht deklariertes Zitat ohne Quellenangabe ... korrigiert! Die Zitat Funktion des Forums richtig nutzen
Here what I did, i usually want to keep the MAC-Address, thats why i have those "extra steps" (flagged with +).
I assume that the VM you do this is not critical for accessing the NAS - otherwise please be careful.
- Shutdown VM (I assume it's already down if you're not able to start)- Open the settings of your VM
- Go to Settings, then network
+ Copy the MAC Address of each Interface and write down Switch-Nr., maybe model type as well
- Delete the Networkinterfaces (all of them)
- Apply
- Add Networkinterfaces again
+ Copy back the MAC Addresses from each interface and configure accordingly the switch and model-type.
- Apply
- Start the VM again
Ich kann für die Lösungen wie gesagt nicht die Hand ins Feuer halten, da ich das Problem nicht hatte und daher selbst nicht lösen musste. Ich hoffe aber trotzdem, dass dir das, was ich finden konnte, hilft.
LG
-
Hi,
danke für den Tipp. Ich werde es demnächst probieren - ich komme im Moment nicht dazu :-((
Eine neue VM, die ich inzwischen angelegt habe läuft ganz normal, aber ich hätte die aktuellen Daten von der "alten" VM trotzdem gerne.