QPKG Apps

Aktualisierung für QPKG im QNAPclub Center: WingFTP
Neue Version: 5.1.2.0
Models: TS-NASX86 64bits

Aktualisierung für QPKG im QNAPclub Center: Duplicacy
Neue Version: 2.1.1
Models: TS-ARM-X19,TS-NASX86,TS-NASX86 64bits,TS-X28A,TS-X31,TS-X41

Aktualisierung für QPKG im QNAPclub Center: iPerf3
Neue Version: 3.6.0
Models: TS-NASX86 64bits,TS-X28A,TS-X31,TS-X41

New Qpkg in Qnapclub Store: Bassoon Tracker
Webbased old-school Amiga music tracker - Plays and edits 4-channel Amiga Mod files

Plays and edits 4-track Amiga Mod files.
Live demo at http://www.stef.be/bassoontracker/

If you have ever heard of Protracker or Fasttracker, then you know the drill,
if not, then you are probably too young :-)

It needs a modern browser that support WebAudio. It's tested to work on Chrome, Firefox, Safari, Edge, Chrome on Android, mobile Safari and the Samsung Android Browser. it works best in Chrome.
Models: TS-269H,TS-ARM-X09,TS-ARM-X19,TS-NASARM,TS-NASX86,TS-NASX86 64bits,TS-X28,TS-X28A,TS-X31,TS-X31U,TS-X41

Aktualisierung für QPKG im QNAPclub Center: iPerf3
Neue Version: 3.6.0
Models: TS-X31,TS-NASX86 64bits,TS-X28A,TS-X41

New Qpkg in Qnapclub Store: DigitalRebar
Digital Rebar Provision is a simple and powerful Golang executable that provides a complete API-driven DHCP/PXE/TFTP provisioning system

[ Beta Version until i had confirmation all is running fine ]

if webui doesnt start please cheack log within /opt/DigitalRebar/drp.log (some ports are necessary to be free to run correctly)

port to be free :

https /API : 8092 (self signed cert)
http : 8091
Metrics : 31310
tftp : 69
dhcp : 67
binl : 4011

all command lines are added to NAS $PATH

documentation available at : https://provision.readthedocs.io/en/tip/doc/quickstart.html

The default username & password used for administering the dr-provision service is:

username: rocketskates
password: r0cketsk8ts

About :

Digital Rebar Provision
simple, fast and open API-driven server provisioning.

Digital Rebar Provision (DRP) is a APLv2 simple Golang executable that provides a simple yet complete API-driven DHCP/PXE/TFTP provisioning and workflow system.

DRP is designed to be a complete data center provisioning, content scaffolding and infrastructure workflow platform with a cloud native architecture that completely replaces Cobbler, Foreman, MaaS or similar technologies. DRP offers a single golang binary (less than 30MB) with no dependencies capable of installation on a laptop, RPi or switch supporting both bare metal and virtualized infrastructure.

Key Features:

API-driven infrastructure-as-code automation
Multi-boot workflows using composable and reusable building blocks
Event driven actions via Websockets API
Extensible Plug-in Model for public, vendor and internal enhancements
Supports ALL orchestration tools including Chef, Puppet, Ansible, SaltStack, Bosh, Terraform, etc
RAID, IPMI, and BIOS Configuration (via commercial plugins)

If you like it.. do not forget to pay me a beer, link is on qnapclub page for the ;)
Models: TS-NASX86 64bits

New Qpkg in Qnapclub Store: Chrome
Chrome Web Browser with UBlock Origin
Models: TS-NASX86 64bits

New Qpkg in Qnapclub Store: Vera Concierge
Allows you to use Google Home or your Mobile Device (Android or Apple) via Google Assistant to interact with your Vera Controller(s) and their devices.

Vera Concierge allows you to use Google Home or your Mobile Device (Android or Apple) via Google Assistant to interact with your Vera Controller(s) and their devices.

You can use the Vera Concierge to access multiple Veras, locally or remotely connected.
Not only can you use it command your devices ... you can also use it to get the status of a particular device, or find out what is currently active in your house.

It supports a wide variety of Vera Connected Device types:

Switches (Z-Wave, GC-100, Power Strips, PLTS, Combination, Virtual and Multi Switch)
Light Dimmers
Security Sensors (Door, Window, Motion)
Thermostats
Door Locks (Z-Wave and those controlled by the Garage Door Plugin)
Scenes and PLEG Actions
Alarm Partitions
Window Coverings (These behave a lot like Light dimmers);
Temperature and Humidity Sensors
Broadlink RM devices for IR and RF remote control.
It automatically detects when you add, remove, or rename devices. It also provides facilities for the Vera Alerts plugin to send Text to Speech notifications to one, some, or all of your Google Home and Chrome cast devices that are connected to your LAN.
It also supports the ability to schedule a command in a relative or absolute time in the future.

Conversing with your Vera home
You can control your devices using either or both of the following techniques.
Using the Home Control capabilities of the Google Assistant.
You will first need to add your Home Control devices using the add button. Use Vera Concierge Smart Home to add the devices that you have configured via your Local Concierge Server. Your interaction with these devices is specified by Google. Only a subset of devices are currently supported by Google today.
Just say:
OK Google turn on the Office Light

Using the Vera Concierge assistant.
You can talk to your Vera Concierge ... Just say:
OK Google I want to talk to my Vera Concierge
or
OK Google ask my Vera Concierge to turn on the Kitchen Light
or
OK Google ask my Vera Concierge what is the Garage Door Status
Once you start conversing with Vera Concierge, you will not need to keep saying "OK Google ask Vera Concierge ..."
Your conversation will continue with it until it times out ... or you ask OK Google for something else.
Models: TS-NASX86 64bits,TS-X41,TS-NASX86,TS-X31,TS-X28A

Aktualisierung für QPKG im QNAPclub Center: Harmony
Neue Version: 0.9.1
Models: TS-NASX86 64bits

New Qpkg in Qnapclub Store: Mellow Player
Cloud music integration for your desktop

About
MellowPlayer is a free, open source and cross-platform desktop application that runs web-based music streaming services in its own window and provides integration with your desktop (hotkeys, multimedia keys, system tray, notifications and more).

MellowPlayer is a Qt based alternative to NuvolaPlayer initially crafted for KaOS. MellowPlayer is written in C++ and QML.

Limitations:

For licensing reason, we do not ship the flash player plugin and the widevine DRM plugins in our official releases.
Some services (e.g. Spotify, Soundcloud and Mixcloud) also requires QtWebEngine to be compiled with proprietary codecs, which is not the case in our official releases.
Tidal HiFi does not work because there is no MQA plugin available for chromium based browsers.
Models: TS-NASX86 64bits

New Qpkg in Qnapclub Store: SNORT
Free and lightweight network intrusion detection system (NIDS) software (Command line tool)

snort command added to $PATH
Community Rules preloaded (not updated automatically)
config files in /opt/SNORT/etc
no auto launch, need to be set by yourself withing /opt/SNORT/SNORT.sh

Usage :

[~] # snort --help

,,_ -*> Snort! <*-
o" )~ Version 2.9.11.1 GRE (Build 268)
'''' By Martin Roesch & The Snort Team: http://www.snort.org/contact#team
Copyright (C) 2014-2017 Cisco and/or its affiliates. All rights reserved.
Copyright (C) 1998-2013 Sourcefire, Inc., et al.
Using libpcap version 1.10.0-PRE-GIT (with TPACKET_V3)
Using PCRE version: 8.42 2018-03-20
Using ZLIB version: 1.2.11

USAGE: snort [-options]
Options:
-A Set alert mode: fast, full, console, test or none (alert file alerts only)
"unsock" enables UNIX socket logging (experimental).
-b Log packets in tcpdump format (much faster!)
-B Obfuscated IP addresses in alerts and packet dumps using CIDR mask
-c Use Rules File
-C Print out payloads with character data only (no hex)
-d Dump the Application Layer
-D Run Snort in background (daemon) mode
-e Display the second layer header info
-f Turn off fflush() calls after binary log writes
-F Read BPF filters from file
-g Run snort gid as group (or gid) after initialization
-G <0xid> Log Identifier (to uniquely id events for multiple snorts)
-h Set home network =
(for use with -l or -B, does NOT change $HOME_NET in IDS mode)
-H Make hash tables deterministic.
-i Listen on interface
-I Add Interface name to alert output
-k Checksum mode (all,noip,notcp,noudp,noicmp,none)
-K Logging mode (pcap[default],ascii,none)
-l Log to directory
-L Log to this tcpdump file
-M Log messages to syslog (not alerts)
-m Set umask =
-n Exit after receiving packets
-N Turn off logging (alerts still work)
-O Obfuscate the logged IP addresses
-p Disable promiscuous mode sniffing
-P Set explicit snaplen of packet (default: 1514)
-q Quiet. Don't show banner and status report
-Q Enable inline mode operation.
-r Read and process tcpdump file
-R Include 'id' in snort_intf.pid file name
-s Log alert messages to syslog
-S Set rules file variable n equal to value v
-t Chroots process to after initialization
-T Test and report on the current Snort configuration
-u Run snort uid as user (or uid) after initialization
-U Use UTC for timestamps
-v Be verbose
-V Show version number
-X Dump the raw packet data starting at the link layer
-x Exit if Snort configuration problems occur
-y Include year in timestamp in the alert and log files
-Z Set the performonitor preprocessor file path and name
-? Show this information
are standard BPF options, as seen in TCPDump
Longname options and their corresponding single char version
--logid <0xid> Same as -G
--perfmon-file Same as -Z
--pid-path Specify the directory for the Snort PID file
--snaplen Same as -P
--help Same as -?
--version Same as -V
--alert-before-pass Process alert, drop, sdrop, or reject before pass, default is pass before alert, drop,...
--treat-drop-as-alert Converts drop, sdrop, and reject rules into alert rules during startup
--treat-drop-as-ignore Use drop, sdrop, and reject rules to ignore session traffic when not inline.
--process-all-events Process all queued events (drop, alert,...), default stops after 1st action group
--enable-inline-test Enable Inline-Test Mode Operation
--dynamic-engine-lib Load a dynamic detection engine
--dynamic-engine-lib-dir Load all dynamic engines from directory
--dynamic-detection-lib Load a dynamic rules library
--dynamic-detection-lib-dir Load all dynamic rules libraries from directory
--dump-dynamic-rules Creates stub rule files of all loaded rules libraries
--dynamic-preprocessor-lib Load a dynamic preprocessor library
--dynamic-preprocessor-lib-dir Load all dynamic preprocessor libraries from directory
--dynamic-output-lib Load a dynamic output library
--dynamic-output-lib-dir Load all dynamic output libraries from directory
--create-pidfile Create PID file, even when not in Daemon mode
--nolock-pidfile Do not try to lock Snort PID file
--no-interface-pidfile Do not include the interface name in Snort PID file
--disable-attribute-reload-thread Do not create a thread to reload the attribute table
--pcap-single Same as -r.
--pcap-file file that contains a list of pcaps to read - read mode is implied.
--pcap-list "" a space separated list of pcaps to read - read mode is implied.
--pcap-dir a directory to recurse to look for pcaps - read mode is implied.
--pcap-filter filter to apply when getting pcaps from file or directory.
--pcap-no-filter reset to use no filter when getting pcaps from file or directory.
--pcap-loop this option will read the pcaps specified on command line continuously.
for times. A value of 0 will read until Snort is terminated.
--pcap-reset if reading multiple pcaps, reset snort to post-configuration state before reading next pca p.
--pcap-reload if reading multiple pcaps, reload snort config between pcaps.
--pcap-show print a line saying what pcap is currently being read.
--exit-check Signal termination after callbacks from DAQ_Acquire(), showing the time it
takes from signaling until DAQ_Stop() is called.
--conf-error-out Same as -x
--enable-mpls-multicast Allow multicast MPLS
--enable-mpls-overlapping-ip Handle overlapping IPs within MPLS clouds
--max-mpls-labelchain-len Specify the max MPLS label chain
--mpls-payload-type Specify the protocol (ipv4, ipv6, ethernet) that is encapsulated by MPLS
--require-rule-sid Require that all snort rules have SID specified.
--daq Select packet acquisition module (default is pcap).
--daq-mode Select the DAQ operating mode.
--daq-var Specify extra DAQ configuration variable.
--daq-dir Tell snort where to find desired DAQ.
--daq-list[=] List packet acquisition modules available in dir. Default is static modules only.
--dirty-pig Don't flush packets and release memory on shutdown.
--cs-dir Directory to use for control socket.
--ha-peer Activate live high-availability state sharing with peer.
--ha-out Write high-availability events to this file.
--ha-in Read high-availability events from this file on startup (warm-start).
--suppress-config-log Suppress configuration information output.
Models: TS-NASX86 64bits

New Qpkg in Qnapclub Store: MistServer CE
MistServer is a full-featured, next-generation streaming media toolkit for OTT (internet streaming)

login : admin / pass : qnap
config and log inside /opt/MistServer

It takes care of all the annoying little problems you come across in media streaming projects, allowing you to focus on what makes your product or service unique. The MistServer software and our accompanying services allow anyone to quickly gain and keep a competitive edge.

MistServer helps you reduce your costs for media streaming by allowing you to leverage our experience and well-tested software toolkit to assist your efforts. You will save time because your team no longer has to solve all the problems associated with media streaming. This includes device compatibility, protocol implementations, and hooking the media delivery into your other systems for monitoring and access control.

Furthermore, our engineering team is available to assist you with all media-related matters, including informing you of other options than just the ones we provide. Because all our services come at a flat monthly fee, you can be sure of receiving honest advice for all situations.
Models: TS-X41,TS-NASX86 64bits,TS-X28A,TS-X31

New Qpkg in Qnapclub Store: NetScan
CLI command line to Scan a network for ports that are open on an ip/ip range, and ips that are in use on that network.

netscan command added to $PATH

Usage
netscan - Scan network ips and ports.

Usage: netscan

Flags:

-d, --debug enable debug logging (default: false)
-p, --ports Ports to scan (ex. 80-443 or 80,443,8080 or 1-20,22,80-443) (default "80,443,8001,9001")
--proto protocol to use (can be set more than once) (default "tcp")
-t, --timeout timeout for ping of port (default: 1s)

Commands:

version Show the version information.
Examples
# for a cidr
$ netscan 192.168.0.1/24

# for a single ip
$ netscan 192.168.104.30
Models: TS-X28A,TS-X41,TS-ARM-X19,TS-NASX86 64bits,TS-NASX86,TS-X31

New Qpkg in Qnapclub Store: Only Office
ONLYOFFICE provides you with the most secure way to create, edit and collaborate on business documents online

ONLYOFFICE offers the most feature-rich office suite available, highly compatible with Microsoft Office and OpenDocument file formats. View, edit and collaboratively work with documents, spreadsheets and presentations directly from your web application.
Models: TS-NASX86 64bits

New Qpkg in Qnapclub Store: Only Office
ONLYOFFICE provides you with the most secure way to create, edit and collaborate on business documents online
Models: TS-NASX86 64bits

Aktualisierung für QPKG im QNAPclub Center: PHP
Neue Version: 7.2.7
Models: TS-NASX86 64bits

New Qpkg in Qnapclub Store: PHP
Hypertext Preprocessor Language for Embedded Qnap Apache Server

all files are inside /opt/PHPFPM

Web Management to edit php-fpm.conf, www.conf, and php.ini (qpkg need be restarted that change take effect)

dozen PECL Extension added and full php featured

amqp
apcu
bcmath
bz2
calendar
ctype
curl
date
dba
dom
eio
enchant
ev
exif
fileinfo
filter
ftp
gd
gettext
gmp
hash
hprose
hrtime
http
iconv
imagick
imap
intl
json
krb5
ldap
libxml
mailparse
mbstring
memcached
mongodb
mysqli
mysqlnd
OAuth
odbc
openssl
pcntl
pcre
PDO
pdo_dblib
pdo_mysql
PDO_ODBC
pdo_pgsql
pdo_sqlite
pgsql
Phar
propro
pspell
raphf
readline
redis
Reflection
scrypt
session
shmop
SimpleXML
snmp
soap
sockets
sodium
SPL
sqlite3
swoole
tidy
timezonedb
tokenizer
wddx
xattr
xdebug
xml
xmlreader
xmlrpc
xmlwriter
xsl
xxtea
yaml
zip
zlib
Models: TS-NASX86 64bits

Aktualisierung für QPKG im QNAPclub Center: PHP 7.2.7
Neue Version: 7.2.7
Models: TS-NASX86 64bits

Aktualisierung für QPKG im QNAPclub Center: PHPList
Neue Version: 3.3.3.1
Models: TS-269H,TS-ARM-X09,TS-NASX86 64bits,TS-ARM-X19,TS-NASARM,TS-NASX86,TS-X28,TS-X28A,TS-X31,TS-X31U,TS-X41

New Qpkg in Qnapclub Store: Cuberite
A lightweight, fast and extensible Game Server for Minecraft

all files are inside /opt/Cuberite
by default login : admin pass : qnap and listen on port 23333 ( can be modified inside /opt/Cubernite/Webadmin.ini )

Plugins non included

Cuberite is a Free and Open Source (FOSS) Minecraft-compatible game server. Cuberite is designed with performance, configurability, and extensibility in mind, and also aims to accurately recreate most Minecraft features. The server is written in C++, and there is an extensive plugin system that allows for the user to write their own plugins with Lua.

Cuberite was created in late 2010 by FakeTruth with its original name "MCServer", as a replacement for the vanilla Minecraft server. It was soon open-sourced and developers started contributing. Today, Cuberite is maintained by a large team of contributors and plugin developers.
Models: TS-NASX86 64bits,TS-X41,TS-X28A