Du könntest den Support auf dieses Thema verweisen. Dann hat er auch gleich ein par Logs.
TS-253A hängt nach Reboot-Befehl
- thixo
- Erledigt
-
-
ui 10 min später Antwort auf meine Nachfrage bekommen, ja ich kann flashen. Ich hoffe er hat mich richtig verstanden.
-
Du solltest aber die komplette Anleitung abarbeiten - sprich, auch das flashen des EC obwohl er den gleichen Stand hat.
-
Klar ich muss auch beides flashen da ->
User mustdowngrade EC firmware if EC version higher than QX47EC20
ich hab QX47EC23
aber erst morgen das mach ich in Ruhe
-
Ok, das eine File ist das eigentliche Bios aber wofür ist die QX47ECxx ?
-
Die ist für den Embedded Controller. https://de.wikipedia.org/wiki/Embedded_Controller
-
Danke.
-
Danke an alle für die Hilfe, Bios und EC Update ist durch und es gab keine besonderen Fehlermeldungen. Dateisystemcheck läuft gerade und reboot hat auch funktioniert, nun hoffe ich das alles gut läuft.
Bisher läuft alles tadellos
-
-
Sauber
-
Da in dem .pdf ein Fehler mit Sonderzeichen war, hefte ich mal das .docx an als zip Datei welches Qnap mir geschickt hat
-
kann man das docx nicht als RTF oder TXT konvertieren, oder den Code hier in eine Codebox einfügen?
Der Support benutzt leider ein gar nicht gut geeignetes Format, um den Code zu transportieren... das ist fehlerträchtig!
-
da sind Bilder bei, wollte die nicht weg lassen sonst hätte ich den Text gepostet und beim konvert in .rtf stimmt das ganze Dokument nicht mehr das lasse ich lieber. (gerade ausprobiert mit Word)
-
KB - TS-x53A NAS does not power on as scheduled
Please follow below SOP to flash BIOS for TS-X53A.
Preparation:
- Download package from below link:
N3150: http://download.qnap.com/Stora…bios/TS-x53A_QX47AR50.zip
N3160: http://download.qnap.com/Stora…bios/TS-x53A_QX47AR25.zip- Extract the compressed file, please upload below 3 files to shared folder, “Public”
N3150: flashrom, QX47AR50.bin and QX47EC20.BIN
N3160: flashrom, QX47AR25 and QX47EC20.BIN- Follow below commands to complete the BIOS flash procedure.
1. Check current CPU name
There are two version of BIOS, QX47AR50.bin and QX47AR25.bin, corresponding to N3150 and N3160 respectively.N3150 -> QX47AR50.bin
N3160 -> QX47AR25.binCAUTION: Do NOT apply wrong version of BIOS, it will brick your machine.
Bash
Alles anzeigen[~] # hal_app --se_sys_get_system_info NAS display name = TS-453ANAS CPU_0 Model Name = Intel(R) Celeron(R) CPU N3150 @ 1.60GHzNAS CPU_0 running speed = 1601 MHz === Slot1 Mem Info. Channed Id is 1, Slot Addr is 0x50 === Mem Type: DDR3_SDRAMModule Type: SO_DIMM Ram Size: 2048 MB Speed: 1600 MHz Module Manufacture: Transcend Information === Slot2 Mem Info. Channed Id is 2, Slot Addr is 0x51 === Mem Type: DDR3_SDRAMModule Type: SO_DIMM Ram Size: 2048 MB Speed: 1600 MHz Module Manufacture: Transcend Information
2. Check current BIOS and EC version
CAUTION: User must downgrade EC firmware if EC version is higher than QX47EC203. If your BIOS version is equal or later than QX47AR19, then you can skip this step. Otherwise please follow steps of below screenshots to disable BIOS lock before updating BIOS..
3a. Reboot NAS and click Ctrl+F1 to enter Advanced BIOS settings.
Bild1.jpg3b. Choose Chipset >> South Bridge
Bild2.jpg3c. Choose Security Configuration
Bild3.jpg3d. Choose BIOS Lock and select Disabled
Bild4.jpg3e. Click F4 and choose Yes to save configuration and exit
Bild5.jpg4. Update BIOS
For different CPU, user should give different parameter to flashrom.
N3150: ./flashrom -p internal:laptop=this_is_not_a_laptop -w QX47AR50.bin
N3160: ./flashrom -p internal:laptop=this_is_not_a_laptop -w QX47AR25.binCAUTION: Do NOT apply wrong version of BIOS, it will brick your machine.
Code
Alles anzeigen[~] # cd /share/Public [/share/Public] # chmod +x flashrom [/share/Public] # ./flashrom -p internal:laptop=this_is_not_a_laptop -w QX47AR50.bin flashrom v0.9.8-unknown on Linux 3.19.8 (x86_64) flashrom is free software, get the source code at http://www.flashrom.org Calibrating delay loop... OK. Active config mode, unknown reg 0x20 ID: 85. Please send the output of "flashrom -V -p internal" toflashrom@flashrom.org with W836xx: your board name: flashrom -Vas the subject to help us finish support for your Super I/O. Thanks. ======================================================================== WARNING! You may be running flashrom on an unsupported laptop. We couldnot detect this for sure because your vendor has not setup the SMBIOStables correctly. You can enforce execution by adding'-p internal:laptop=this_is_not_a_laptop' to the command line, butplease read the following warning if you are not sure. Laptops, notebooks and netbooks are difficult to support and werecommend to use the vendor flashing utility. The embedded controller(EC) in these machines often interacts badly with flashing.See the manpage and http://www.flashrom.org/Laptops for details. If flash is shared with the EC, erase is guaranteed to brick your laptopand write may brick your laptop.Read and probe may irritate your EC and cause fan failure, backlightfailure and sudden poweroff.You have been warned. ======================================================================== Proceeding anyway because user forced us to. Found chipset "Intel Braswell". This chipset is marked as untested. If you are using an up-to-date versionof flashrom *and* were (not) able to successfully update your firmware with it,then please email a report to flashrom@flashrom.org including a verbose (-V) log. Thank you! Enabling flash write... OK. Found Macronix flash chip "MX25U6435E/F" (8192 kB, SPI) mapped at physical address 0xff800000. === This flash part has status UNTESTED for operations: PROBE READ ERASE WRITEThe test status of this chip may have been updated in the latest developmentversion of flashrom. If you are running the latest development version,please email a report to flashrom@flashrom.org if any of the above operationswork correctly for you with this flash chip. Please include the flashrom logfile for all operations you tested (see the man page for details), and mentionwhich mainboard or programmer you tested in the subject line. Thanks for your help! Reading old flash chip contents... done. Erasing and writing flash chip... Erase/write done. Verifying flash... VERIFIED.
4. Update EC firmware
CAUTION: User must downgrade EC firmware if EC version higher than QX47EC20
[/share/Public] # hal_app --update_ec_fw file=QX47EC20.BIN5. Reboot NAS with below command.
[/share/Public] # hal_app --reset_ec_fw6. After the reboot, check BIOS/EC version again
7. Done. -
-
Das kann man aber so Posten das es einklappbar ist. Nee nee. Nie ist ein Moderator da wenn man einen braucht. *frechgrins*
-
-
Hallo Leute und dr_mike die Anleitung oben ist für die TS-X53A
Haben andere NAS auch so ein Problem ?
Meine Backup NAS TS-659 hat das Problem das Sie nicht mehr ganz Startet bzw Sie bleibt hängenich will jetzt nichts falsches machen mir ist klar, dass das Bios von oben nicht paßt.
Bye Stefan
PS Grüße aus München
-
Ich habe auch ein TS-453 Pro das dieselben Symptomen aufweist. Gibt es diesbezüglich auch eine Firmware?
Gruß
-
Ticket nach Qnap aufmachen wäre, glaube ich, der richtige Weg bei euch beiden.