Ich habe hier massive Probleme mit meinem TS409pro. Immer wieder wird die Platte 3 beim resyncing ausgehängt:
Ich habe hier 4 gleiche Platten Seagate 2TB ST32000542AS eingebaut. Irgendwie scheint die Platte ins Slot 3 immer Probleme zu verursachen.
Folgendes habe ich schon versucht:
- Platten in verschiedenen Slots getauscht.
- NAS ohne Platten gebootet (nach kompletter Datensicherung) und es somit in den Lieferzustand versetzt, dann die 4 Platten eingesetzt und neu formatiert. Nach dem Neustart startet automatisch das Resyncing (dauert ca. 2 Tage). Kurz vor Schluss kam dann folgende Meldung im Protokoll:
"17","2","2011-02-12","02:25:31","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Drive 3 failed.""16","0","2011-02-12","02:25:28","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Drive 3 has been removed.""15","1","2011-02-12","02:25:18","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Resyncing skipped.""14","0","2011-02-12","02:25:16","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Start resyncing.""13","1","2011-02-12","02:25:15","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Resyncing skipped.""12","0","2011-02-10","20:10:38","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Start resyncing.""11","0","2011-02-10","20:05:31","System","127.0.0.1","localhost","System started.""10","0","2011-02-10","20:01:38","System","127.0.0.1","localhost","System was shut down on Thu Feb 10 20:01:38 CET 2011.""9","0","2011-02-10","20:01:37","System","127.0.0.1","localhost","System was updated successfully from 3.3.0 to 3.3.0.""8","0","2011-02-10","18:57:11","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Initialization completed.""7","0","2011-02-10","19:57:13","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Formatting completed.""6","0","2011-02-10","18:22:23","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Start formatting.""5","0","2011-02-10","18:21:58","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Start resyncing.""4","2","2011-02-10","18:21:56","System","127.0.0.1","localhost","/share/Qdownload is not ready for Download Station.""3","0","2011-02-10","18:20:37","System","127.0.0.1","localhost","[RAID5 Disk Volume: Drive 1 2 3 4] Start initialization.""2","0","2011-02-10","18:20:10","System","127.0.0.1","localhost","Finder (from ATHLON3400) is going to make changes on system settings, all services will be stopped.""1","0","2011-02-10","18:11:48","System","127.0.0.1","localhost","System started."Ist mein NAS defekt, oder woran kann das liegen?
Wenn ich mit mit putty auf dem NAS einwähle erhalte ich mit dem mount-Befehl folgende Ausgabe:
[~] # mount
/proc on /proc type proc (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
sysfs on /sys type sysfs (rw)
tmpfs on /tmp type tmpfs (rw,size=16M)
usbfs on /proc/bus/usb type usbfs (rw)
/dev/sda4 on /mnt/ext type ext3 (rw)
/dev/md9 on /mnt/HDA_ROOT type ext3 (rw)
/dev/md0 on /share/MD0_DATA type ext3 (rw,usrjquota=aquota.user,jqfmt=vfsv0,data=writeback)
/bin on /mnt/HDA_ROOT/rootfs_2_3_6/bin type none (rw,bind)
/dev on /mnt/HDA_ROOT/rootfs_2_3_6/dev type none (rw,bind)
/mnt/HDA_ROOT/.config on /mnt/HDA_ROOT/rootfs_2_3_6/etc/config type none (rw,bind)
/proc on /mnt/HDA_ROOT/rootfs_2_3_6/proc type none (rw,bind)
/tmp on /mnt/HDA_ROOT/rootfs_2_3_6/tmp type none (rw,bind)
/share/MD0_DATA/.qpkg on /mnt/HDA_ROOT/rootfs_2_3_6/share/MD0_DATA/.qpkg type none (rw,bind)
tmpfs on /.eaccelerator.tmp type tmpfs (rw,size=32M)
/share/MD0_DATA/Qdownload on /mnt/HDA_ROOT/rootfs_2_3_6/share/Qdownload type none (rw,bind)Ich hoffe, jemand kann mir helfen. Vielen Dank schonmal vorab.
Hopsing