PORT Forwarding 2 Router für Cloud

  • Hallo,
    ich hoffe ich bin hier im richtigen Thread :)


    Habe folgendes Problem:
    Die Einrichtung meines QNAP TS-221 für myQNAPcloud funktioniert nicht, folgende Fehlermeldung:


    Router Screenshot
    Extern verlinktes Bild entfernt! Der Grund!
    Error Screenshot:
    Extern verlinktes Bild entfernt! Der Grund!


    Diagnose: ------ NAT PMP Diagnostics ------ initnatpmp() returned 0 (SUCCESS) using gateway : 192.168.1.1 sendpublicaddressrequest returned 2 (SUCCESS) readnatpmpresponseorretry returned -7 (FAILED) ------ UPnP Diagnostics ------ upnpc : miniupnpc library test client. (c) 2006-2011 Thomas Bernard Go to http://miniupnp.free.fr/ or http://miniupnp.tuxfamily.org/ for more information. List of UPNP devices found on the network : desc: http://192.168.1.112:6357/ st: upnp:rootdevice desc: http://192.168.1.133:60607/8CC1218FB6A7/Server1/ddd st: upnp:rootdevice desc: http://192.168.1.133:60606/8CC1218FB6A7/Server0/ddd st: upnp:rootdevice desc: http://192.168.1.99:8200/rootDesc.xml st: upnp:rootdevice desc: http://192.168.1.99:49152/gatedesc.xml st: upnp:rootdevice UPnP device found. Is it an IGD ? : http://192.168.1.112:6357/ Trying to continue anyway Local LAN ip address : 192.168.1.99 GetConnectionTypeInfo failed. Status : , uptime=0s, LastConnectionError : Time started : Sat Mar 1 00:31:40 2014 MaxBitRateDown : 0 bps MaxBitRateUp 0 bps GetExternalIPAddress() returned 401 GetExternalIPAddress failed. GetGenericPortMappingEntry() returned 401 (Invalid Action)


    Zu meiner Hardware Konfiguration:
    Ich habe einen ROUTER von Thompson (meines Internetproviders UPC).
    An diesem hängt über LAN-Kabel mein Linksys E2000 Router, an welchem mein gesamtes Netzwerk (LAN & WLAN) hängt.


    (Zur Erklärung: Da der Thompson Router keine Verbindung LAN zu WLAN zuläßt, brauche ich den Linksys Router)


    Thompson: 192.168.0.1
    Internet IP des Linksys Routers: 192.168.0.10


    Linksys IP im Netzwerk: 192.168.1.1
    QNAP IP: 192.168.1.99


    Beide Router haben UpnP aktiviert, nehme an ich muß noch irgendwelche Ports "weiterleiten", aber weiß nicht, welche & wohin :)


    Für Hilfe sehr dankbar, LG

    Einmal editiert, zuletzt von GorillaBD () aus folgendem Grund: Extern verlinktes Bild entfernt, siehe Forenregeln!