Beiträge von tomatojoe

tomatojoe · 9. November 2016

Ich habe folgendes erhalten:

Code

[~] # mdadm -AfR /dev/md1 /dev/sd[abd]3mdadm: /dev/sda3 is busy - skippingmdadm: /dev/sdb3 is busy - skipping[~] # cat /proc/mdstatPersonalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multi                                                                                                                                                             path]md0 : active raid5 sda3[0] sdb3[4] sdc3[3]      7794127232 blocks super 1.0 level 5, 64k chunk, algorithm 2 [3/2] [UU_]      [==>..................]  recovery = 10.4% (408195456/3897063616) finish=87                                                                                                                                                             0.9min speed=66760K/secmd256 : active raid1 sdc2[2](S) sdb2[1] sda2[0]      530112 blocks super 1.0 [2/2] [UU]      bitmap: 0/1 pages [0KB], 65536KB chunkmd13 : active raid1 sda4[0] sdc4[3] sdb4[24]      458880 blocks super 1.0 [24/3] [UU_U____________________]      bitmap: 1/1 pages [4KB], 65536KB chunkmd9 : active raid1 sda1[0] sdc1[3] sdb1[24]      530048 blocks super 1.0 [24/3] [UU_U____________________]      bitmap: 1/1 pages [4KB], 65536KB chunkunused devices: <none>

Code

md0 : active raid5 sda3[0] sdb3[4] sdc3[3]
7794127232 blocks super 1.0 level 5, 64k chunk, algorithm 2 [3/2] [UU_]
[==>..................] recovery = 10.4% (408195456/3897063616) finish=87 0.9min speed=66760K/sec

Das ist eigenartig hier wird ein Recovery durchgeführt:

tomatojoe · 9. November 2016

Habe die File rauskopiert, ich habe diese gezipped upgeloaded.

tomatojoe · 8. November 2016

Ich weiß zwar nicht ob du dies gemeint hast. Hoffe war das was du verlangt hast.
Aber dennoch keine Berechtigung für diesen Befehl.

Code

[~] # /etc/logs/kmsg
-sh: /etc/logs/kmsg: Permission denied
[~] #

tomatojoe · 8. November 2016

Zitat von dr_mike

Was sagt dmesg?

Code

[~] # dmesg
5] md: pers->run() failed ...
[ 47.499125] md: md1 stopped.
[ 47.502042] md: unbind<sda3>
[ 47.531966] md: export_rdev(sda3)
[ 47.535317] md: unbind<sdb3>
[ 47.591950] md: export_rdev(sdb3)
[ 47.862445] md13: unknown partition table
[ 53.752896] UBI: attaching mtd3 to ubi0
[ 53.756748] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 53.763114] UBI: logical eraseblock size: 126976 bytes
[ 53.768603] UBI: smallest flash I/O unit: 2048
[ 53.773393] UBI: VID header offset: 2048 (aligned 2048)
[ 53.779416] UBI: data offset: 4096
[ 55.353517] UBI: max. sequence number: 2
[ 55.372911] UBI: attached mtd3 to ubi0
[ 55.376996] UBI: MTD device name: "boot1_rootfs2"
[ 55.384392] UBI: MTD device size: 216 MiB
[ 55.391106] UBI: number of good PEBs: 1723
[ 55.397612] UBI: number of bad PEBs: 5
[ 55.403796] UBI: number of corrupted PEBs: 0
[ 55.409856] UBI: max. allowed volumes: 128
[ 55.414895] UBI: wear-leveling threshold: 4096
[ 55.419977] UBI: number of internal volumes: 1
[ 55.426264] UBI: number of user volumes: 1
[ 55.431447] UBI: available PEBs: 0
[ 55.436674] UBI: total number of reserved PEBs: 1723
[ 55.441653] UBI: number of PEBs reserved for bad PEB handling: 17
[ 55.447915] UBI: max/mean erase counter: 10/6
[ 55.452813] UBI: image sequence number: 37956274
[ 55.465378] UBI: background thread "ubi_bgt0d" started, PID 2845
[ 55.591982] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
[ 55.598097] UBIFS: mounted read-only
[ 55.601682] UBIFS: file system size: 208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
[ 55.609721] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
[ 55.617066] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 55.622923] UBIFS: default compressor: lzo
[ 55.627030] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 73.622821] UBIFS: un-mount UBI device 0, volume 0
[ 73.681375] UBI: mtd3 is detached from ubi0
[ 73.914905] UBI: attaching mtd3 to ubi0
[ 73.918758] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 73.925075] UBI: logical eraseblock size: 126976 bytes
[ 73.930489] UBI: smallest flash I/O unit: 2048
[ 73.935213] UBI: VID header offset: 2048 (aligned 2048)
[ 73.941235] UBI: data offset: 4096
[ 75.441159] UBI: max. sequence number: 2
[ 75.463109] UBI: attached mtd3 to ubi0
[ 75.466883] UBI: MTD device name: "boot1_rootfs2"
[ 75.472579] UBI: MTD device size: 216 MiB
[ 75.477556] UBI: number of good PEBs: 1723
[ 75.482281] UBI: number of bad PEBs: 5
[ 75.486735] UBI: number of corrupted PEBs: 0
[ 75.491195] UBI: max. allowed volumes: 128
[ 75.495840] UBI: wear-leveling threshold: 4096
[ 75.500568] UBI: number of internal volumes: 1
[ 75.505049] UBI: number of user volumes: 1
[ 75.509511] UBI: available PEBs: 0
[ 75.513992] UBI: total number of reserved PEBs: 1723
[ 75.518980] UBI: number of PEBs reserved for bad PEB handling: 17
[ 75.525102] UBI: max/mean erase counter: 10/6
[ 75.529469] UBI: image sequence number: 37956274
[ 75.534202] UBI: background thread "ubi_bgt0d" started, PID 2948
[ 75.664152] UBIFS: mounted UBI device 0, volume 0, name "rootfs2"
[ 75.670267] UBIFS: mounted read-only
[ 75.673871] UBIFS: file system size: 208113664 bytes (203236 KiB, 198 MiB, 1639 LEBs)
[ 75.681899] UBIFS: journal size: 9023488 bytes (8812 KiB, 8 MiB, 72 LEBs)
[ 75.689240] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 75.695094] UBIFS: default compressor: lzo
[ 75.699200] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 75.778859] UBIFS: un-mount UBI device 0, volume 0
[ 75.840267] UBI: mtd3 is detached from ubi0
[ 76.084219] kjournald starting. Commit interval 5 seconds
[ 76.173874] EXT3-fs (md13): using internal journal
[ 76.178686] EXT3-fs (md13): mounted filesystem with ordered data mode
[ 87.934599] md: md256: resync done.
[ 87.938104] md: Resyncing done: md256
[ 88.950697] RAID1 conf printout:
[ 88.950707] --- wd:2 rd:2
[ 88.950715] disk 0, wo:0, o:1, dev:sda2
[ 88.950721] disk 1, wo:0, o:1, dev:sdb2
[ 89.479731] sysinfo: Module loaded.
[ 89.836208] fnotify: Load file notify kernel module.
[ 91.482130] usbcore: registered new interface driver snd-usb-audio
[ 91.503161] usbcore: registered new interface driver snd-usb-caiaq
[ 91.555358] Linux video capture interface: v2.00
[ 91.603903] usbcore: registered new interface driver uvcvideo
[ 91.609669] USB Video Class driver (1.1.1)
[ 95.533072] eth0: pfe_eth_open
[ 95.536273] hif_process_client_req: register client_id 1
[ 95.541599] pfe_hif_client_register
[ 95.545117] hif_lib_set_rx_cpu_affinity:Client (1) and HIF Rx processing will use same cpu
[ 95.553413] eth0: pfe_gemac_init
[ 96.052618] eth1: pfe_eth_open
[ 96.055819] hif_process_client_req: register client_id 0
[ 96.061145] pfe_hif_client_register
[ 96.064668] hif_lib_set_rx_cpu_affinity:Client (0) and HIF Rx processing will use same cpu
[ 96.072965] eth1: pfe_gemac_init
[ 99.552140] PHY: comcerto-0:06 - Link is Up - 1000/Full
[ 100.072134] PHY: comcerto-0:04 - Link is Up - 1000/Full
[ 118.295315] IPv6: Loaded, but administratively disabled, reboot required to enable
[ 118.318502] Bridge firewalling registered
[ 161.597441] warning: `proftpd' uses 32-bit capabilities (legacy support in use)
[ 179.973879] Initiate iscsi target log successfully.
[ 180.103345] iSCSI Target Portal Group: 1 is already inactive, ignoring request.
[ 180.230398] iSCSI Target Portal Group: 1 is already inactive, ignoring request.
[ 180.404709] iscsi_log_rcv_msg: get log pid = 7407.
[ 184.619065] UBI: attaching mtd6 to ubi2
[ 184.622951] UBI: physical eraseblock size: 131072 bytes (128 KiB)
[ 184.629235] UBI: logical eraseblock size: 126976 bytes
[ 184.634702] UBI: smallest flash I/O unit: 2048
[ 184.639422] UBI: VID header offset: 2048 (aligned 2048)
[ 184.645473] UBI: data offset: 4096
[ 184.766254] UBI: max. sequence number: 2
[ 184.781433] UBI: attached mtd6 to ubi2
[ 184.785231] UBI: MTD device name: "config"
[ 184.790297] UBI: MTD device size: 15 MiB
[ 184.795193] UBI: number of good PEBs: 120
[ 184.799821] UBI: number of bad PEBs: 0
[ 184.804280] UBI: number of corrupted PEBs: 0
[ 184.808735] UBI: max. allowed volumes: 128
[ 184.813368] UBI: wear-leveling threshold: 4096
[ 184.818083] UBI: number of internal volumes: 1
[ 184.822541] UBI: number of user volumes: 1
[ 184.826995] UBI: available PEBs: 0
[ 184.831449] UBI: total number of reserved PEBs: 120
[ 184.836342] UBI: number of PEBs reserved for bad PEB handling: 2
[ 184.842368] UBI: max/mean erase counter: 1/0
[ 184.846647] UBI: image sequence number: 1872325126
[ 184.851548] UBI: background thread "ubi_bgt2d" started, PID 7520
[ 184.981242] UBIFS: mounted UBI device 2, volume 0, name "config"
[ 184.987289] UBIFS: mounted read-only
[ 184.990882] UBIFS: file system size: 12316672 bytes (12028 KiB, 11 MiB, 97 LEBs)
[ 184.998484] UBIFS: journal size: 2031616 bytes (1984 KiB, 1 MiB, 16 LEBs)
[ 185.005818] UBIFS: media format: w4/r0 (latest is w4/r0)
[ 185.011665] UBIFS: default compressor: lzo
[ 185.015782] UBIFS: reserved for root: 0 bytes (0 KiB)
[ 185.027601] UBIFS: un-mount UBI device 2, volume 0
[ 185.087509] UBI: mtd6 is detached from ubi2
[ 185.784728] rule type=2, num=0
[ 186.227823] Loading iSCSI transport class v2.0-870.
[ 186.386638] iscsi: registered transport (tcp)
[~] #

Alles anzeigen

tomatojoe · 7. November 2016

Du meinst diesen Befehl?

Zitat von dr_mike

cat /proc/mdstat

Ich habe diesen jetzt ausgeführt, jedoch ohne die 3. Platte.

Code

[~] # cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath]
md256 : active raid1 sdc2[2](S) sdb2[1] sda2[0]
      530112 blocks super 1.0 [2/2] [UU]
      bitmap: 0/1 pages [0KB], 65536KB chunk


md13 : active raid1 sda4[0] sdc4[3] sdb4[24]
      458880 blocks super 1.0 [24/3] [UU_U____________________]
      bitmap: 1/1 pages [4KB], 65536KB chunk


md9 : active raid1 sda1[0] sdc1[3] sdb1[24]
      530048 blocks super 1.0 [24/3] [UU_U____________________]
      bitmap: 1/1 pages [4KB], 65536KB chunk


unused devices: <none>

Alles anzeigen

tomatojoe · 6. November 2016

Gibt es eine Möglichkeit diesen wiederherzustellen oder die Daten zu beschaffen?

Vor dem Problem war die Platte 1 und 4 aktiv

Die Platte 2 war vorher als Gloabl Spare.

Ich weiss nicht ob dies jetzt somit hinfällig wäre.

tomatojoe · 6. November 2016

Hallo dr_mike,

danke für Deine Antwort ich habe das NAS heruntergefahren und die Platte 3 heraus genommen und anschließend wieder hoch gefahren.

Ergebnis: Leider ohne Erfolg.

screenshot.JPG

tomatojoe · 6. November 2016

Liebe Forum-Mitglieder,

Nach einem Problem habe ich versucht einen Rebuild zu machen, welches dummerweise bei mir mit folgendem Fehler, RAID Inaktiv, endete.

Ich habe im versch. Forum nachgelesen und konnte infos via putty rauskopieren.
Bitte kann mir jemand helfen das Problem zu beseitigen.

Anbei meine
NAS Model: QNAP TS-431 Firmware: 4.1.4 (2015/08/04)
Ich habe hier 4x4TB Western Digital WD400EFRX-68WT0N0
Raid5 3+1 GlobalSpare
Auf der Platte waren nur noch mehr ca. 400GB frei.

Vielen Dank im Vorraus.

Code

[~] # cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath]
md256 : active raid1 sdd2[2](S) sdb2[1] sda2[0]
530112 blocks super 1.0 [2/2] [UU]
bitmap: 0/1 pages [0KB], 65536KB chunk




md13 : active raid1 sda4[0] sdd4[3] sdb4[24]
458880 blocks super 1.0 [24/3] [UU_U____________________]
bitmap: 1/1 pages [4KB], 65536KB chunk




md9 : active raid1 sda1[0] sdd1[3] sdb1[24]
530048 blocks super 1.0 [24/3] [UU_U____________________]
bitmap: 1/1 pages [4KB], 65536KB chunk




unused devices: <none>


[~] # cat /proc/partitions
major minor #blocks name


8 0 3907018584 sda
8 1 530125 sda1
8 2 530142 sda2
8 3 3897063763 sda3
8 4 530144 sda4
8 5 8353796 sda5
8 16 3907018584 sdb
8 17 530125 sdb1
8 18 530142 sdb2
8 19 3897063763 sdb3
8 20 530144 sdb4
8 21 8353796 sdb5
8 32 3907018584 sdc
8 33 530125 sdc1
8 34 530142 sdc2
8 35 3897063763 sdc3
8 36 530144 sdc4
8 37 8353796 sdc5
8 48 3907018584 sdd
8 49 530125 sdd1
8 50 530142 sdd2
8 51 3897063763 sdd3
8 52 530144 sdd4
8 53 8353796 sdd5
31 0 640 mtdblock0
31 1 384 mtdblock1
31 2 32768 mtdblock2
31 3 221184 mtdblock3
31 4 32768 mtdblock4
31 5 221184 mtdblock5
31 6 15360 mtdblock6
9 9 530048 md9
9 13 458880 md13
9 256 530112 md256


[~] # mdadm --examine /dev/sda3
/dev/sda3:
Magic : a92b4efc
Version : 1.0
Feature Map : 0x0
Array UUID : d081a144:4e74ed17:23a29ea9:e32668cd
Name : 1
Creation Time : Mon Jul 27 19:03:09 2015
Raid Level : raid5
Raid Devices : 3




Avail Dev Size : 7794127240 (3716.53 GiB 3990.59 GB)
Array Size : 7794127232 (7433.06 GiB 7981.19 GB)
Used Dev Size : 7794127232 (3716.53 GiB 3990.59 GB)
Super Offset : 7794127504 sectors
Unused Space : before=0 sectors, after=272 sectors
State : clean
Device UUID : e9331a6b:f5801bc4:afead865:6491c2a1




Update Time : Sat Nov 5 22:46:15 2016
Checksum : d2dadbce - correct
Events : 3750




Layout : left-symmetric
Chunk Size : 64K




Device Role : Active device 0
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)


[~] # mdadm --examine /dev/sdb3
/dev/sdb3:
Magic : a92b4efc
Version : 1.0
Feature Map : 0x2
Array UUID : d081a144:4e74ed17:23a29ea9:e32668cd
Name : 1
Creation Time : Mon Jul 27 19:03:09 2015
Raid Level : raid5
Raid Devices : 3




Avail Dev Size : 7794127240 (3716.53 GiB 3990.59 GB)
Array Size : 7794127232 (7433.06 GiB 7981.19 GB)
Used Dev Size : 7794127232 (3716.53 GiB 3990.59 GB)
Super Offset : 7794127504 sectors
Recovery Offset : 81111552 sectors
Unused Space : before=0 sectors, after=272 sectors
State : clean
Device UUID : 9377d76c:083b29ee:9edbfcd9:fc701027




Update Time : Sat Nov 5 22:46:15 2016
Checksum : fced5418 - correct
Events : 3750




Layout : left-symmetric
Chunk Size : 64K




Device Role : Active device 2
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)


[~] # mdadm --examine /dev/sdc3
/dev/sdc3:
Magic : a92b4efc
Version : 1.0
Feature Map : 0x0
Array UUID : d081a144:4e74ed17:23a29ea9:e32668cd
Name : 1
Creation Time : Mon Jul 27 19:03:09 2015
Raid Level : raid5
Raid Devices : 3




Avail Dev Size : 7794127240 (3716.53 GiB 3990.59 GB)
Array Size : 7794127232 (7433.06 GiB 7981.19 GB)
Used Dev Size : 7794127232 (3716.53 GiB 3990.59 GB)
Super Offset : 7794127504 sectors
Unused Space : before=0 sectors, after=272 sectors
State : clean
Device UUID : 715e5524:a7d41798:a2ed2e37:92115c0e




Update Time : Sat Nov 5 04:51:38 2016
Checksum : 9e00e107 - correct
Events : 3680




Layout : left-symmetric
Chunk Size : 64K




Device Role : Active device 2
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)


[~] # mdadm --examine /dev/sdd3
/dev/sdd3:
Magic : a92b4efc
Version : 1.0
Feature Map : 0x0
Array UUID : d081a144:4e74ed17:23a29ea9:e32668cd
Name : 1
Creation Time : Mon Jul 27 19:03:09 2015
Raid Level : raid5
Raid Devices : 3




Avail Dev Size : 7794127240 (3716.53 GiB 3990.59 GB)
Array Size : 7794127232 (7433.06 GiB 7981.19 GB)
Used Dev Size : 7794127232 (3716.53 GiB 3990.59 GB)
Super Offset : 7794127504 sectors
Unused Space : before=0 sectors, after=272 sectors
State : clean
Device UUID : 78630829:bb82c08d:54e10f79:365cf362




Update Time : Sat Nov 5 22:46:15 2016
Checksum : 2ed5ce9d - correct
Events : 3750




Layout : left-symmetric
Chunk Size : 64K




Device Role : Active device 1
Array State : AAA ('A' == active, '.' == missing, 'R' == replacing)

Alles anzeigen

Beiträge von tomatojoe

RAID5 mit 3 Platten Inaktiv

RAID5 mit 3 Platten Inaktiv

RAID5 mit 3 Platten Inaktiv

RAID5 mit 3 Platten Inaktiv

RAID5 mit 3 Platten Inaktiv

RAID5 mit 3 Platten Inaktiv

RAID5 mit 3 Platten Inaktiv

RAID5 mit 3 Platten Inaktiv