Guten Abend,
Um Cloudcutter zu betreiben brauche ich eine WIFI Stick an dem Debian LXD Container.
Jedoch wird der Wifi-USBStick nicht (richtig) gefunden.
Ein lsusb im Container zeigt den Stick an:
Code
root@debian-bookworm:~# lsusb
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 006: ID 2357:0109 TP-Link TL-WN823N v2/v3 [Realtek RTL8192EU]
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hubEin dmesg | grep usb liefert:
Code
root@debian-bookworm:~# dmesg | grep usb
[ 0.034389] Kernel command line: consoleblank=0 console=ttyS0,115200n8 intel_iommu=on,igfx_off i915.enable_hd_vgaarb=1 iommu=pt i915.disable_power_well=0 i915.enable_rc6=0 i915.enable_guc=2 memmap=2M$0x8000000 ramoops.mem_address=0x8000000 ramoops.mem_size=0x200000 ramoops.console_size=0x100000 usbcore.autosuspend=-1 zswap.enabled=1 zswap.compressor=lz4 BOOT_IMAGE=/boot/bzImage root=/dev/ram0 rw
[ 0.532442] usbcore: registered new interface driver usbfs
[ 0.532833] usbcore: registered new interface driver hub
[ 0.533202] usbcore: registered new device driver usb
[ 7.444867] usbcore: registered new interface driver btusb
[ 7.521387] usbcore: registered new interface driver usbhid
[ 7.527638] usbhid: USB HID core driver
[ 8.427016] usbcore: registered new interface driver usblp
[ 8.513006] usbcore: registered new interface driver usb-storage
[ 8.520559] usbcore: registered new interface driver uas
[ 8.891844] usbcore: registered new interface driver r8152
[ 9.393741] usbcore: registered new interface driver cdc_ether
[ 9.401018] usbcore: registered new interface driver rndis_host
[ 15.222379] usbcore: registered new interface driver pl2303
[ 15.228672] usbserial: USB Serial support registered for pl2303
[ 15.236221] usbcore: registered new interface driver cdc_acm
[ 63.884857] snd_usb_audio: unknown parameter 'qnap_start_index' ignored
[ 63.892392] usbcore: registered new interface driver snd-usb-audio
[ 63.917349] usbcore: registered new interface driver snd-usb-caiaq
[ 63.928852] usbcore: registered new interface driver uvcvideo
[ 932.542471] usb 1-1: new high-speed USB device number 3 using xhci_hcd
[ 932.697156] [usb.001.003] /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1 added.
[ 934.014662] usbcore: registered new interface driver rtl8192eu
[145143.428454] usb 1-1: USB disconnect, device number 3
[145143.515157] [usb.001.003] /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1 removed.
[145143.817028] usb 1-1: new high-speed USB device number 4 using xhci_hcd
[145144.072455] [usb.001.004] /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1 added.
[145144.605103] usbcore: deregistering interface driver rtl8192eu
[145145.270307] usb 1-1: reset high-speed USB device number 4 using xhci_hcd
[172366.190947] usb 1-1: USB disconnect, device number 4
[172366.249441] [usb.001.004] /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1 removed.
[172366.500693] usb 1-1: new high-speed USB device number 5 using xhci_hcd
[172366.662117] [usb.001.005] /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1 added.
[172366.903589] usb 1-1: USB disconnect, device number 5
[172368.249414] usbcore: registered new interface driver rtl8192eu
[172369.403395] [usb.001.005] /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1 removed.
[172403.609688] usb 1-1: new high-speed USB device number 6 using xhci_hcd
[172403.877569] [usb.001.006] /sys/devices/pci0000:00/0000:00:14.0/usb1/1-1 added.Leider bin ich nicht firm, um die Meldung auszuwerten.
Weiß jemand rat wie ich den wifi-USBStick an den Container bekomme?
Viele Grüße
Oelkanne