[TVS-472-XT] [MacBook Pro 13", 2018, 4 x tbt3, macOs Catalina 10.15.5]
NAS ist auf Adapter 1 mit 1GBit im LAN verbunden, Mac über WLAN im LAN. Mac und NAS sind zusätzlich durch ein QNAP Thunderbolt 3 Kabel verbunden (Backups, besondere Dateiablagen).
Heute früh liess ich das NAS neu booten, führte dann das Update auf 4.4.2.1320 build 20200529 durch.
Auffälligkeit: Die Thunderbolt-3 Verbindung zum NAS ist seitdem "tot".
Die Thunderbolt-Übersicht im Menü Netzwerk- und virtueller Switch / Schnittstellen / Thunderbolt zeigt Thunderbolt 1 und 2 als getrennt an.
Das Kabel steckt.
"ifconfig" auf dem NAS sagt:
...
tbtbr0 Link encap:Ethernet HWaddr 02:92:FC:24:27:00
inet addr:169.254.4.147 Bcast:169.254.255.255 Mask:255.255.0.0
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 B) TX bytes:0 (0.0 B)
...
ifconfig auf dem Mac sagt
...
bridge0: flags=8863<UP,BROADCAST,SMART,RUNNING,SIMPLEX,MULTICAST> mtu 1500 index 15
eflags=41000000<ECN_ENABLE,FASTLN_ON>
options=63<RXCSUM,TXCSUM,TSO4,TSO6>
ether 82:23:5e:86:44:01
Configuration:
id 0:0:0:0:0:0 priority 0 hellotime 0 fwddelay 0
maxage 0 holdcnt 0 proto stp maxaddr 100 timeout 1200
root id 0:0:0:0:0:0 priority 0 ifcost 0 port 0
ipfilter disabled flags 0x0
member: en1 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 11 priority 0 path cost 0
hostfilter 0 hw: 0:0:0:0:0:0 ip: 0.0.0.0
member: en2 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 12 priority 0 path cost 0
hostfilter 0 hw: 0:0:0:0:0:0 ip: 0.0.0.0
member: en3 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 13 priority 0 path cost 0
hostfilter 0 hw: 0:0:0:0:0:0 ip: 0.0.0.0
member: en4 flags=3<LEARNING,DISCOVER>
ifmaxaddr 0 port 14 priority 0 path cost 0
hostfilter 0 hw: 0:0:0:0:0:0 ip: 0.0.0.0
Address cache:
nd6 options=201<PERFORMNUD,DAD>
media: <unknown type>
status: inactive
state availability: 0 (true)
qosmarking enabled: yes mode: none
low power mode: disabled
multi layer packet logging (mpklog): disabled
...
Alles anzeigen
Nun bin ich ein wenig ratlos, wo ich nach was suchen soll.
Ist das Kabel beim Update "hopps" gegangen?
Welches Logfile sagt mir, was auf der QNAP Thunderbolt Bridge läuft, wenn das Kabel gesteckt wird?
Freue mich über eure Hinweise.