[Howto] Trac auf TS-439Pro

  • [Howto] Trac auf TS-439Pro

    [NAS Typ:] TS-439 Pro
    [Firmware:] 3.2.0 Build 1212T
    [Getestet:] ja
    [Sonstige Modifikationen:] keine



    Hallo Zusammen,

    diese Anleitung soll die Installation von Trac beschreiben. Ich habe sie aus dem Netz zusammengetragen, beziehungsweise von den Subversion-Anleitungen abgeleit:
    forum.qnapclub.de/viewtopic.php?f=80&t=2489&p=13426#p13426
    forum.qnapclub.de/viewtopic.php?f=80&t=5533
    (vielen Dank dafür, sie haben mir sehr geholfen)

    Voraussetzungen:
    [list]
    * SSH-Zugriff (z.B. mit Putty)
    * Zugriff auf die Webadministrationsoberfläche
    * Das Paketmangement-System Optware-ipkg
    * Subversion (wenn es zusammen mit Trac verwendet werden soll)
    [/list]

    Schritt 1: Optware installieren
    siehe Link am Anfang

    Schritt 2: Subversion installieren
    siehe Link am Anfang

    Schrit 3: Trac installieren
    Per SSH auf das NAS zugreifen und Trac installieren:

    Quellcode

    1. ipkg install py25-trac py25-setuptools svn-py


    Schritt 4: Umgebung anlegen
    Verzeichnis anlegen:

    Quellcode

    1. mkdir /share/MD0_DATA/Trac


    Rechte vergeben:

    Quellcode

    1. chmod 777 /share/MD0_DATA/Trac


    Projekt anlegen:

    Quellcode

    1. trac-admin /share/MD0_DATA/Trac/projekt1 initenv


    Schritt 5: Trac-Server starten

    Quellcode

    1. tracd -p 3691 -d -e /share/MD0_DATA/Trac

    Nach -p kann ein beliebiger Port angegeben werden (hier 3691). Der Parameter -e legt fest, dass nicht jedes Projekt einzeln angegeben werden muss.

    Start-Skript erstellen:

    Quellcode

    1. nano /share/MD0_DATA/Trac/starttrac.sh


    Shell-Script

    1. #!/bin/sh
    2. TRACD=/opt/bin/tracd
    3. PARAMS="-d"
    4. PORT="-p 3691"
    5. TRAC_PATH="-e /share/MD0_DATA/Trac"
    6. test -f $TRACD || exit 0
    7. case "$1" in
    8. start)
    9. echo -n "Starting trac services: "
    10. $TRACD $PARAMS $PORT $TRAC_PATH
    11. echo " tracd started."
    12. ;;
    13. stop)
    14. echo -n "Shutting down trac:"
    15. /usr/bin/killall tracd
    16. echo " tracd stopped."
    17. ;;
    18. restart)
    19. $0 stop
    20. $0 start
    21. ;;
    22. *)
    23. echo "Usage: /etc/init.d/tracd.sh {start|stop|restart}"
    24. exit 1
    25. esac
    26. exit 0
    Alles anzeigen


    Das Skript speichern und ausführbar machen:

    Quellcode

    1. chmod +x /share/MD0_DATA/Trac/starttrac.sh


    Damit das Skript automatisch ausgeführt wird, muss die Datei /etc/config/qpkg.conf bearbeitet werden (hier sind alle Einträge bei mir aufgelistet):

    Quellcode

    1. [Optware]
    2. Name = Optware
    3. Version = 0.99.163
    4. Enable = TRUE
    5. QPKG_File = Optware.qpkg
    6. Date = 2009-12-18
    7. Shell = /share/MD0_DATA/.qpkg/Optware/Optware.sh
    8. Install_Path = /share/MD0_DATA/.qpkg/Optware
    9. Author = QNAP Systems, Inc.
    10. [Subversion]
    11. Name = Subversion
    12. Version = 1.6.6
    13. Enable = TRUE
    14. QPKG_File = -
    15. Date = 2009-12-18
    16. Shell = /share/MD0_DATA/Subversion/startsvn.sh
    17. Install_Path = /share/MD0_DATA/Subversion
    18. Author = JoAs
    19. [Trac]
    20. Name = Trac
    21. Version = 0.11.5
    22. Enable = TRUE
    23. QPKG_File = -
    24. Date = 2009-12-20
    25. Shell = /share/MD0_DATA/Trac/starttrac.sh
    26. Install_Path = /share/MD0_DATA/Trac
    27. Author = JoAs
    Alles anzeigen

    Damit finden sich 3 Einträge in 'Anwendungen->QPKG-Plug-ins' der QNAP-Weboberfläche.

    Schritt 6: Zugriff auf Trac

    Quellcode

    1. http://<qnap>:3691/projekt1

    wobei <qnap> die Ip-Adresse oder der Hostname des Devices ist.

    Ich hoffe, es ist für den einen oder anderen hilfreich..
    Viel Spass und Gruß
    jo
  • Re: [Howto] Trac auf TS-439Pro

    Hallo,

    der Beitrag ist zwar schon etwas älter, aber ich wollte es grade auspobieren und bin bei Schritt 4 über folgendes Problem gestolpert:

    Quellcode

    1. [/] # trac-admin /share/MD0_DATA/Trac/projekt1 initenv
    2. Traceback (most recent call last):
    3. File "/opt/bin/trac-admin", line 5, in <module>
    4. from pkg_resources import load_entry_point
    5. File "/opt/lib/python2.5/site-packages/pkg_resources.py", line 2607, in <module>
    6. parse_requirements(__requires__), Environment()
    7. File "/opt/lib/python2.5/site-packages/pkg_resources.py", line 565, in resolve
    8. raise DistributionNotFound(req) # XXX put more info here
    9. pkg_resources.DistributionNotFound: Genshi>=0.6


    Hat jemand eine Idee was mir noch fehlt? Ich hab zwar schonmla versucht dieses Genshi als ipkg zu finden, aber ohne Erfolg.

    Achja, da das Problem anschiend was mit python zu tun hat: Ich hab python nicht über das qpkg installiert, da ich pyLoad ausprobiert habe und shcon wusste dass dies damit Probleme macht.

    EDIT: Habs selbst rausgefunden. :)
    Nachdem ich ein wenig in der Trac Installations-Anleitung gelesen habe hab ich es dann mit folgender Anweisung, die man vor Schritt 4 noch tätigen sollte, hinbekommen:

    Quellcode

    1. easy_install Genshi


    Das ist die komfortable Lösung über die man Egg-Bibliotheken von Phyton bequem automatisiert runterladen und installieren kann. Über ipkg bekommt man (derzeit?) leider nur die Version 0.5.1-2 und nicht die geforderte 0.6er die das aktuelle Trac 0.12 benötigt.

    Hoffe es hilft jemandem, wenn er über ein gleiches Problem stoplert.
    Und Danke an den Author des Howto's, hat mir sehr geholfen. :thumbsup:

    MfG
    Frank
  • Re: [Howto] Trac auf TS-439Pro

    Erstmal danke an den Ersteller des HowTo´s.
    Ich habe Trac zusammen mit SVN schon viele Monate am laufen und genutzt, alles nach diesem HowTo.

    Leider ist jetzt nach dem Update auf die FW 3.3.3.0928T und ein Update der ipkg Pakete (ipkg update && ipkg upgrade) wo
    auch Trac und Python dabei war - TRAC defekt. Die GUI startet zwar, schmeißt aber einen Fehler aus:

    Quellcode

    1. Warning: Can't synchronize with repository "(default)" (Unsupported version control system "svn": No module named svn). Look in the Trac log for more information.

    In der Log steht:

    Brainfuck-Quellcode

    1. 2010-10-11 13:09:24,151 Trac[env] INFO: -------------------------------- environment startup [Trac 0.12.1] --------------------------------
    2. 2010-10-11 13:09:24,197 Trac[loader] DEBUG: Loading trac.about from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    3. 2010-10-11 13:09:24,199 Trac[loader] DEBUG: Loading trac.admin.console from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    4. 2010-10-11 13:09:24,228 Trac[loader] DEBUG: Loading trac.admin.web_ui from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    5. 2010-10-11 13:09:24,233 Trac[loader] DEBUG: Loading trac.attachment from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    6. 2010-10-11 13:09:24,234 Trac[loader] DEBUG: Loading trac.db.mysql from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    7. 2010-10-11 13:09:24,239 Trac[loader] DEBUG: Loading trac.db.postgres from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    8. 2010-10-11 13:09:24,243 Trac[loader] DEBUG: Loading trac.db.sqlite from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    9. 2010-10-11 13:09:24,255 Trac[loader] DEBUG: Loading trac.mimeview.patch from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    10. 2010-10-11 13:09:24,258 Trac[loader] DEBUG: Loading trac.mimeview.pygments from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    11. 2010-10-11 13:09:24,283 Trac[loader] DEBUG: Skipping "trac.mimeview.pygments = trac.mimeview.pygments [pygments]": ("DistributionNotFound: Pygments>=0.6" not found)
    12. 2010-10-11 13:09:24,284 Trac[loader] DEBUG: Loading trac.mimeview.rst from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    13. 2010-10-11 13:09:24,309 Trac[loader] DEBUG: Skipping "trac.mimeview.rst = trac.mimeview.rst [rest]": ("DistributionNotFound: docutils>=0.3" not found)
    14. 2010-10-11 13:09:24,309 Trac[loader] DEBUG: Loading trac.mimeview.silvercity from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    15. 2010-10-11 13:09:24,334 Trac[loader] DEBUG: Skipping "trac.mimeview.silvercity = trac.mimeview.silvercity [silvercity]": ("DistributionNotFound: SilverCity>=0.9.4" not found)
    16. 2010-10-11 13:09:24,335 Trac[loader] DEBUG: Loading trac.mimeview.txtl from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    17. 2010-10-11 13:09:24,362 Trac[loader] DEBUG: Skipping "trac.mimeview.txtl = trac.mimeview.txtl [textile]": ("DistributionNotFound: textile>=2.0" not found)
    18. 2010-10-11 13:09:24,363 Trac[loader] DEBUG: Loading trac.prefs from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    19. 2010-10-11 13:09:24,368 Trac[loader] DEBUG: Loading trac.search from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    20. 2010-10-11 13:09:24,371 Trac[loader] DEBUG: Loading trac.ticket.admin from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    21. 2010-10-11 13:09:24,377 Trac[loader] DEBUG: Loading trac.ticket.query from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    22. 2010-10-11 13:09:24,391 Trac[loader] DEBUG: Loading trac.ticket.report from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    23. 2010-10-11 13:09:24,395 Trac[loader] DEBUG: Loading trac.ticket.roadmap from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    24. 2010-10-11 13:09:24,401 Trac[loader] DEBUG: Loading trac.ticket.web_ui from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    25. 2010-10-11 13:09:24,415 Trac[loader] DEBUG: Loading trac.timeline from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    26. 2010-10-11 13:09:24,421 Trac[loader] DEBUG: Loading trac.versioncontrol.admin from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    27. 2010-10-11 13:09:24,432 Trac[loader] DEBUG: Loading trac.versioncontrol.svn_authz from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    28. 2010-10-11 13:09:24,434 Trac[loader] DEBUG: Loading trac.versioncontrol.svn_fs from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    29. 2010-10-11 13:09:24,440 Trac[loader] DEBUG: Loading trac.versioncontrol.svn_prop from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    30. 2010-10-11 13:09:24,469 Trac[loader] DEBUG: Loading trac.versioncontrol.web_ui from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    31. 2010-10-11 13:09:24,470 Trac[loader] DEBUG: Loading trac.web.auth from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    32. 2010-10-11 13:09:24,471 Trac[loader] DEBUG: Loading trac.web.session from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    33. 2010-10-11 13:09:24,472 Trac[loader] DEBUG: Loading trac.wiki.admin from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    34. 2010-10-11 13:09:24,473 Trac[loader] DEBUG: Loading trac.wiki.interwiki from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    35. 2010-10-11 13:09:24,480 Trac[loader] DEBUG: Loading trac.wiki.macros from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    36. 2010-10-11 13:09:24,481 Trac[loader] DEBUG: Loading trac.wiki.web_api from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    37. 2010-10-11 13:09:24,483 Trac[loader] DEBUG: Loading trac.wiki.web_ui from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    38. 2010-10-11 13:09:24,486 Trac[loader] DEBUG: Loading tracopt.mimeview.enscript from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    39. 2010-10-11 13:09:24,489 Trac[loader] DEBUG: Loading tracopt.mimeview.php from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    40. 2010-10-11 13:09:24,492 Trac[loader] DEBUG: Loading tracopt.perm.authz_policy from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    41. 2010-10-11 13:09:24,495 Trac[loader] DEBUG: Loading tracopt.perm.config_perm_provider from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    42. 2010-10-11 13:09:24,497 Trac[loader] DEBUG: Loading tracopt.ticket.commit_updater from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    43. 2010-10-11 13:09:24,505 Trac[loader] DEBUG: Loading tracopt.ticket.deleter from /share/MD0_DATA/.qpkg/Optware/lib/python2.5/site-packages
    44. 2010-10-11 13:09:24,524 Trac[default_workflow] DEBUG: Workflow actions at initialization: {u'resolve': {u'operations': [u'set_resolution'], 'name': u'resolve', 'default': 0, 'newstate': u'closed', 'oldstates': [u'new', u'assigned', u'accepted', u'reopened'], u'permissions': [u'TICKET_MODIFY']}, u'accept': {u'operations': [u'set_owner_to_self'], 'name': u'accept', 'default': 0, 'newstate': u'accepted', 'oldstates': [u'new', u'assigned', u'accepted', u'reopened'], u'permissions': [u'TICKET_MODIFY']}, u'leave': {u'operations': [u'leave_status'], 'name': u'leave', u'default': 1, 'newstate': u'*', 'oldstates': [u'*'], 'permissions': []}, u'reopen': {u'operations': [u'del_resolution'], 'name': u'reopen', 'default': 0, 'newstate': u'reopened', 'oldstates': [u'closed'], u'permissions': [u'TICKET_CREATE']}, u'reassign': {u'operations': [u'set_owner'], 'name': u'reassign', 'default': 0, 'newstate': u'assigned', 'oldstates': [u'new', u'assigned', u'accepted', u'reopened'], u'permissions': [u'TICKET_MODIFY']}, '_reset': {'operations': ['reset_workflow'], 'name': 'reset', 'default': 0, 'newstate': 'new', 'oldstates': [], 'permissions': []}}
    45. 2010-10-11 13:09:24,531 Trac[env] WARNING: base_url option not set in configuration, generated links may be incorrect
    46. 2010-10-11 13:09:24,532 Trac[main] DEBUG: Dispatching <Request "GET '/'">
    47. 2010-10-11 13:09:24,573 Trac[svn_fs] INFO: Failed to load Subversion bindings
    48. Traceback (most recent call last):
    49. File "/opt/lib/python2.5/site-packages/trac/versioncontrol/svn_fs.py", line 267, in __init__
    50. _import_svn()
    51. File "/opt/lib/python2.5/site-packages/trac/versioncontrol/svn_fs.py", line 68, in _import_svn
    52. from svn import fs, repos, core, delta
    53. ImportError: No module named svn
    54. 2010-10-11 13:09:24,575 Trac[chrome] DEBUG: Prepare chrome data for request
    55. 2010-10-11 13:09:24,583 Trac[session] DEBUG: Retrieving session for ID '711ebb626f80326cc4ba868c'
    56. 2010-10-11 13:09:24,590 Trac[api] DEBUG: action controllers for ticket workflow: ['ConfigurableTicketWorkflow']
    57. 2010-10-11 13:09:24,594 Trac[perm] DEBUG: No policy allowed anonymous performing TRAC_ADMIN on None
    58. 2010-10-11 13:09:24,595 Trac[perm] DEBUG: No policy allowed anonymous performing PERMISSION_GRANT on None
    59. 2010-10-11 13:09:24,596 Trac[perm] DEBUG: No policy allowed anonymous performing PERMISSION_REVOKE on None
    60. 2010-10-11 13:09:24,597 Trac[perm] DEBUG: No policy allowed anonymous performing TICKET_ADMIN on None
    61. 2010-10-11 13:09:24,599 Trac[perm] DEBUG: No policy allowed anonymous performing VERSIONCONTROL_ADMIN on None
    62. 2010-10-11 13:09:24,604 Trac[perm] DEBUG: No policy allowed anonymous performing TICKET_CREATE on None
    63. 2010-10-11 13:09:24,610 Trac[api] INFO: Synchronized '' repository in 0.05 seconds
    64. 2010-10-11 13:09:24,647 Trac[perm] DEBUG: No policy allowed anonymous performing WIKI_MODIFY on <Resource u'wiki:WikiStart'>
    65. 2010-10-11 13:09:24,647 Trac[attachment] DEBUG: LegacyAttachmentPolicy denied anonymous access to <Resource u'wiki:WikiStart, attachment'>. User needs WIKI_MODIFY
    66. 2010-10-11 13:09:24,648 Trac[perm] DEBUG: LegacyAttachmentPolicy denies anonymous performing ATTACHMENT_CREATE on <Resource u'wiki:WikiStart, attachment'>
    67. 2010-10-11 13:09:24,743 Trac[perm] DEBUG: No policy allowed anonymous performing EMAIL_VIEW on None
    68. 2010-10-11 13:09:25,213 Trac[perm] DEBUG: No policy allowed anonymous performing WIKI_ADMIN on <Resource u'wiki:WikiStart'>
    69. 2010-10-11 13:09:26,033 Trac[perm] DEBUG: No policy allowed anonymous performing WIKI_DELETE on <Resource u'wiki:WikiStart'>
    70. 2010-10-11 13:09:26,034 Trac[perm] DEBUG: No policy allowed anonymous performing WIKI_RENAME on <Resource u'wiki:WikiStart'>
    Alles anzeigen

    Was mir auffält:

    Quellcode

    1. Trac[svn_fs] INFO: Failed to load Subversion bindings
    2. Traceback (most recent call last):
    3. File "/opt/lib/python2.5/site-packages/trac/versioncontrol/svn_fs.py", line 267, in __init__
    4. _import_svn()
    5. File "/opt/lib/python2.5/site-packages/trac/versioncontrol/svn_fs.py", line 68, in _import_svn
    6. from svn import fs, repos, core, delta
    7. ImportError: No module named svn

    Aber was soll mir das sagen ?
    Das sind meine installieren Pakete:

    Quellcode

    1. [/share/MD0_DATA/Trac/projekte/log] # ipkg list_installed
    2. adduser - 1.10.3-1 - a multi-call binary for login and user account administration
    3. apr - 1.3.12-1 - Apache Portable Runtime library
    4. apr-util - 1.3.9-1 - Apache Portable Runtime utilities library
    5. avahi - 0.6.24-2 - A system for multicast DNS service discovery, an implementation of Zeroconf.
    6. boost-regex - 1_38_0-3 - Boost is a set of peer-reviewed extensions to the standard C++ library
    7. bzip2 - 1.0.6-1 - Very high-quality data compression program
    8. clamav - 0.96-1 - Clam ANtivirus is a GPL anti-virus toolkit for UNIX
    9. cyrus-sasl-libs - 2.1.23-1 - Provides client or server side authentication (see RFC 2222).
    10. dbus - 1.2.16-1 - D-Bus is a message bus system, a simple way for applications to talk to one another.
    11. e2fslibs - 1.41.9-1 - Ext2 Filesystem Libraries
    12. expat - 2.0.1-1 - XML Parser library
    13. faad2 - 2.6-3 - Freeware Advanced Audio Coder
    14. ffmpeg - 0.svn20080409-2 - FFmpeg is an audio/video conversion tool.
    15. file - 5.04-1 - Ubiquitous file identification utility.
    16. flac - 1.2.1-1 - FLAC is a free lossless audio codec. This package contains the codec libraries and the command-line tools flac and metaflac.
    17. fontconfig - 2.8.0-0 - Font configuration library
    18. freetype - 2.3.6-1 - Free truetype library
    19. fribidi - 0.10.9-1 - An implementation of the Unicode Bidirectional Algorithm (bidi).
    20. gconv-modules - 2.6.1-1 - Provides gconv modules missing from the firmware. These are used by glibc iconv() implementation.
    21. gdbm - 1.8.3-2 - GNU dbm is a set of database routines that use extensible hashing. It works similar to the standard UNIX dbm routines.
    22. glib - 2.20.4-1 - The GLib library of C routines.
    23. hdparm - 9.33-1 - Linux hard drive parameter utility
    24. htop - 0.8.3-1 - An interactive process viewer.
    25. irssi - 0.8.14-1 - A terminal based IRC client for UNIX systems.
    26. liba52 - 0.7.4-1 - a free ATSC A/52 stream decoder.
    27. libcurl - 7.21.1-1 - Curl is a command line tool for transferring files with URL syntax, supporting FTP, FTPS, HTTP, HTTPS, GOPHER, TELNET, DICT, FI
    28. libdaemon - 0.13-1 - A lightweight C library that eases the writing of UNIX daemons.
    29. libdb - 4.2.52-3 - Berkeley DB Libraries
    30. libdvbpsi - 0.1.5-1 - A simple library designed for decoding and generation of MPEG TS and DVB PSI tables.
    31. libdvdnav - 0.1.10-1 - dvdnav
    32. libdvdread - 0.9.7-2 - library for reading dvd
    33. libebml - 1.0.0-1 - Extensible Binary Meta Language access library
    34. libgc - 6.8-1 - The Boehm-Demers-Weiser conservative garbage collector can be used as a garbage collecting replacement for C malloc or C++ new.
    35. libgmp - 4.3.2-1 - GNU Multiple Precision Arithmetic Library.
    36. libid3tag - 0.15.1b-1 - The library used for ID3 tag reading
    37. libmad - 0.15.1b-4 - MPEG Audio Decoder library
    38. libmatroska - 1.0.0-1 - lib to access Matroska (an extensible open standard Audio/Video container format)
    39. libmpcdec - 1.2.6-1 - Portable Musepack decoder library.
    40. libmpeg2 - 0.4.1-2 - A free library for decoding MPEG-2 and MPEG-1 video streams.
    41. libogg - 1.2.0-1 - Ogg is a multimedia container format.
    42. libpcap - 1.0.0-2 - PCAP Library
    43. libpng - 1.2.44-1 - Portable Network Graphics Libraries
    44. libshout - 2.2.2-2 - Library which can be used to write a source client like ices.
    45. libstdc++ - 6.0.9-6 - Standard C++ library, needed for dynamically linked C++ programs
    46. libupnp - 1.6.6-1 - The Universal Plug and Play (UPnP) SDK for Linux provides support for building UPnP-compliant control points, devices, and brid
    47. libvorbis - 1.2.3-1 - Ogg Vorbis compressed audio format.
    48. libxml2 - 2.7.7-2 - Libxml2 is the XML C parser and toolkit developed for the Gnome project.
    49. lsof - 4.82-1 - LiSt Open Files - a diagnostic tool.
    50. lzo - 2.03-1 - Compression library
    51. mc - 4.7.0.9-1 - Midnight Commander File Manager
    52. mkvtoolnix - 4.2.0-1 - A set of tools to create, alter and inspect Matroska files
    53. nano - 2.2.5-1 - A pico like editor
    54. ncurses - 5.7-1 - NCurses libraries
    55. ncursesw - 5.7-1 - NCurses libraries with wide char support
    56. neon - 0.29.3-1 - an HTTP and WebDAV client library, with a C interface
    57. nmap - 5.21-1 - Nmap is a feature-rich portscanner
    58. openldap-libs - 2.3.43-1 - Open Lightweight Directory Access Protocol
    59. openssl - 0.9.8o-1 - Openssl provides the ssl implementation in libraries libcrypto and libssl, and is needed by many other applications and librari
    60. pcre - 8.10-1 - Perl-compatible regular expression library
    61. perl - 5.10.0-6 - Practical Extraction and Report Language.
    62. py25-genshi - 0.6-1 - A toolkit for stream-based generation of output for the web.
    63. py25-setuptools - 0.6c11-1 - Tool to build and distribute Python packages, enhancement to distutils.
    64. py25-subvertpy - 0.7.3.1-1 - Alternative Python bindings for Subversion, aiming to have complete, portable and Pythonic Python bindings.
    65. py25-trac - 0.12.1-1 - An enhanced wiki and issue tracking system for software development projects.
    66. python25 - 2.5.5-2 - Python is an interpreted, interactive, object-oriented programming language.
    67. python26 - 2.6.6-1 - Python is an interpreted, interactive, object-oriented programming language.
    68. readline - 6.1-2 - The GNU Readline library provides a set of functions for use by applications that allow users to edit command lines as they are
    69. screen - 4.0.3-2 - A screen manager that supports multiple logins on single terminal
    70. slang - 2.2.2-1 - S-Lang is a multi-platform library designed to allow a developer to create robust multi-platform software.
    71. speex - 1.2rc1-2 - Speex is an Open Source/Free Software patent-free audio compression format designed for speech.
    72. sqlite - 3.7.2-1 - SQLite is a small C library that implements a self-contained, embeddable, zero-configuration SQL database engine.
    73. svn - 1.6.13-1 - a compelling replacement for CVS
    74. svn-py - 1.6.13-1 - python SWIG binding for subversion
    75. swig - 1.3.39-1 - Simplified Wrapper and Interface Generator
    76. taglib - 1.6.3-1 - A library for reading and editing the meta-data of several popular audio formats.
    77. termcap - 1.3.1-2 - Terminal emulation library
    78. unrar - 3.9.8-1 - unrar is an application that can decompress files and archives created using the RAR compression scheme
    79. unzip - 6.0-2 - A (de)compression library for the ZIP format
    80. vlc - 0.9.9a-1 - VLC is a cross-platform media player and streaming server.
    81. w3m - 0.5.2-1 - Pager/text-based WWW browser with tables/frames support
    82. wget - 1.12-2 - A network utility to retrieve files from the Web
    83. x264 - 0.0.20090220-svn2245-1 - A free library for encoding H264/AVC video streams.
    84. xvid - 1.2.2-1 - Xvid is MPEG4 codec
    85. yougrabber - 0.29.4-1 - YouGrabber is a lightweight, multi-threaded (NPTL based) command line YouTube.com video downloader.
    86. zlib - 1.2.5-1 - zlib is a library implementing the 'deflate' compression system.
    87. Successfully terminated.
    Alles anzeigen


    Hatte schon einer von euch das gleich Problem ?
    Weiß im Moment noch nicht wie ich den Fehler beheben kann.
    Für jede Hilfe bin ich dankbar :thumbsup:

    Grüße
  • Re: [Howto] Trac auf TS-439Pro

    Hallo Leute,

    habe soeben selbst eine frische Trac Installation aufgesetzt und dabei die Anleitung befolgt.


    Lediglich bei den ipkg paketen habe ich neuere verwendet, deshalb wollte ich euch das mittelen:

    Quellcode

    1. ipkg install python26 py26-trac py26-genshi py26-setuptools svn-py



    Damit wird Trac 0.12.1 installiert. Die ist zwar auch nicht aktuell (aktuell ist 1.0), allerdings aktueller als die hier beschriebene Version :D

    Gruß
  • Re: [Howto] Trac auf TS-439Pro

    "BugMeNot" schrieb:

    Hallo Leute,

    Quellcode

    1. ipkg install python26 py26-trac py26-genshi py26-setuptools svn-py

    Damit wird Trac 0.12.1 installiert. Die ist zwar auch nicht aktuell (aktuell ist 1.0), allerdings aktueller als die hier beschriebene Version :D


    Da mittlerweile Subversion 1.7.x stark verbreitet ist, müssen auch aktuelle setuptools nachgeladen werden, um plugins wie z.B. das MasterTicketsPlugin installieren zu können.

    Dazu zuerst die Quelle runterladen und das .zip Archiv entpacken:

    Quellcode

    1. wget --no-check-certificate https://pypi.python.org/packages/source/s/setuptools/setupto>
    2. --2014-08-28 22:35:12-- https://pypi.python.org/packages/source/s/setuptools/setuptools-5.7.zip
    3. Resolving pypi.python.org... 23.235.43.175
    4. Connecting to pypi.python.org|23.235.43.175|:443... connected.
    5. WARNING: cannot verify pypi.python.org's certificate, issued by `/C=US/O=DigiCert Inc/OU=www.digicert.com/CN=DigiCert High Assurance CA-3':
    6. Unable to locally verify the issuer's authority.
    7. WARNING: certificate common name `*.c.ssl.fastly.net' doesn't match requested host name `pypi.python.org'.
    8. HTTP request sent, awaiting response... 200 OK
    9. Length: 1114918 (1.1M) [application/zip]
    10. Saving to: `setuptools-5.7.zip'
    11. 100%[=============================================================================>] 1,114,918 171K/s in 5.4s
    12. 2014-08-28 22:35:18 (201 KB/s) - `setuptools-5.7.zip' saved [1114918/1114918]
    Alles anzeigen


    Manuell die Installation starten. Aufpassen, der Aufruf von Python erfolgt über

    Quellcode

    1. python2.6
    !

    Quellcode

    1. [/share/Installation/trac/setuptools-5.7] # python2.6 setup.py install
    2. running install
    3. /opt/local/lib/python2.5/site-packages (in --site-dirs) does not exist
    4. Checking .pth file support in /opt/local/lib/python2.6/site-packages/
    5. /opt/bin/python2.6 -E -c pass
    6. TEST PASSED: /opt/local/lib/python2.6/site-packages/ appears to support .pth files
    7. running bdist_egg
    8. running egg_info
    9. writing requirements to setuptools.egg-info/requires.txt
    10. writing setuptools.egg-info/PKG-INFO
    11. writing top-level names to setuptools.egg-info/top_level.txt
    12. writing dependency_links to setuptools.egg-info/dependency_links.txt
    13. writing entry points to setuptools.egg-info/entry_points.txt
    14. reading manifest file 'setuptools.egg-info/SOURCES.txt'
    15. reading manifest template 'MANIFEST.in'
    16. writing manifest file 'setuptools.egg-info/SOURCES.txt'
    17. installing library code to build/bdist.linux-armv5tel/egg
    18. running install_lib
    19. running build_py
    20. creating build
    21. creating build/lib
    22. copying pkg_resources.py -> build/lib
    23. copying easy_install.py -> build/lib
    24. creating build/lib/setuptools
    25. copying setuptools/dist.py -> build/lib/setuptools
    26. copying setuptools/version.py -> build/lib/setuptools
    27. copying setuptools/extension.py -> build/lib/setuptools
    28. copying setuptools/package_index.py -> build/lib/setuptools
    29. copying setuptools/lib2to3_ex.py -> build/lib/setuptools
    30. copying setuptools/depends.py -> build/lib/setuptools
    31. copying setuptools/ssl_support.py -> build/lib/setuptools
    32. copying setuptools/__init__.py -> build/lib/setuptools
    33. copying setuptools/py31compat.py -> build/lib/setuptools
    34. copying setuptools/site-patch.py -> build/lib/setuptools
    35. copying setuptools/compat.py -> build/lib/setuptools
    36. copying setuptools/sandbox.py -> build/lib/setuptools
    37. copying setuptools/svn_utils.py -> build/lib/setuptools
    38. copying setuptools/py26compat.py -> build/lib/setuptools
    39. copying setuptools/py27compat.py -> build/lib/setuptools
    40. copying setuptools/archive_util.py -> build/lib/setuptools
    41. copying setuptools/unicode_utils.py -> build/lib/setuptools
    42. creating build/lib/_markerlib
    43. copying _markerlib/markers.py -> build/lib/_markerlib
    44. copying _markerlib/__init__.py -> build/lib/_markerlib
    45. creating build/lib/setuptools/tests
    46. copying setuptools/tests/script-with-bom.py -> build/lib/setuptools/tests
    47. copying setuptools/tests/test_build_ext.py -> build/lib/setuptools/tests
    48. copying setuptools/tests/test_integration.py -> build/lib/setuptools/tests
    49. copying setuptools/tests/test_upload_docs.py -> build/lib/setuptools/tests
    50. copying setuptools/tests/test_egg_info.py -> build/lib/setuptools/tests
    51. copying setuptools/tests/test_sdist.py -> build/lib/setuptools/tests
    52. copying setuptools/tests/test_bdist_egg.py -> build/lib/setuptools/tests
    53. copying setuptools/tests/test_svn.py -> build/lib/setuptools/tests
    54. copying setuptools/tests/__init__.py -> build/lib/setuptools/tests
    55. copying setuptools/tests/test_packageindex.py -> build/lib/setuptools/tests
    56. copying setuptools/tests/test_easy_install.py -> build/lib/setuptools/tests
    57. copying setuptools/tests/server.py -> build/lib/setuptools/tests
    58. copying setuptools/tests/environment.py -> build/lib/setuptools/tests
    59. copying setuptools/tests/test_develop.py -> build/lib/setuptools/tests
    60. copying setuptools/tests/test_resources.py -> build/lib/setuptools/tests
    61. copying setuptools/tests/py26compat.py -> build/lib/setuptools/tests
    62. copying setuptools/tests/test_dist_info.py -> build/lib/setuptools/tests
    63. copying setuptools/tests/test_test.py -> build/lib/setuptools/tests
    64. copying setuptools/tests/test_markerlib.py -> build/lib/setuptools/tests
    65. copying setuptools/tests/test_find_packages.py -> build/lib/setuptools/tests
    66. copying setuptools/tests/test_sandbox.py -> build/lib/setuptools/tests
    67. creating build/lib/setuptools/command
    68. copying setuptools/command/alias.py -> build/lib/setuptools/command
    69. copying setuptools/command/install.py -> build/lib/setuptools/command
    70. copying setuptools/command/egg_info.py -> build/lib/setuptools/command
    71. copying setuptools/command/develop.py -> build/lib/setuptools/command
    72. copying setuptools/command/sdist.py -> build/lib/setuptools/command
    73. copying setuptools/command/test.py -> build/lib/setuptools/command
    74. copying setuptools/command/__init__.py -> build/lib/setuptools/command
    75. copying setuptools/command/register.py -> build/lib/setuptools/command
    76. copying setuptools/command/easy_install.py -> build/lib/setuptools/command
    77. copying setuptools/command/bdist_egg.py -> build/lib/setuptools/command
    78. copying setuptools/command/install_scripts.py -> build/lib/setuptools/command
    79. copying setuptools/command/setopt.py -> build/lib/setuptools/command
    80. copying setuptools/command/saveopts.py -> build/lib/setuptools/command
    81. copying setuptools/command/build_py.py -> build/lib/setuptools/command
    82. copying setuptools/command/install_egg_info.py -> build/lib/setuptools/command
    83. copying setuptools/command/bdist_rpm.py -> build/lib/setuptools/command
    84. copying setuptools/command/build_ext.py -> build/lib/setuptools/command
    85. copying setuptools/command/install_lib.py -> build/lib/setuptools/command
    86. copying setuptools/command/bdist_wininst.py -> build/lib/setuptools/command
    87. copying setuptools/command/upload_docs.py -> build/lib/setuptools/command
    88. copying setuptools/command/rotate.py -> build/lib/setuptools/command
    89. copying setuptools/script (dev).tmpl -> build/lib/setuptools
    90. copying setuptools/script.tmpl -> build/lib/setuptools
    91. creating build/bdist.linux-armv5tel
    92. creating build/bdist.linux-armv5tel/egg
    93. copying build/lib/pkg_resources.py -> build/bdist.linux-armv5tel/egg
    94. copying build/lib/easy_install.py -> build/bdist.linux-armv5tel/egg
    95. creating build/bdist.linux-armv5tel/egg/setuptools
    96. copying build/lib/setuptools/dist.py -> build/bdist.linux-armv5tel/egg/setuptools
    97. copying build/lib/setuptools/version.py -> build/bdist.linux-armv5tel/egg/setuptools
    98. copying build/lib/setuptools/script (dev).tmpl -> build/bdist.linux-armv5tel/egg/setuptools
    99. copying build/lib/setuptools/extension.py -> build/bdist.linux-armv5tel/egg/setuptools
    100. copying build/lib/setuptools/package_index.py -> build/bdist.linux-armv5tel/egg/setuptools
    101. copying build/lib/setuptools/lib2to3_ex.py -> build/bdist.linux-armv5tel/egg/setuptools
    102. copying build/lib/setuptools/depends.py -> build/bdist.linux-armv5tel/egg/setuptools
    103. copying build/lib/setuptools/ssl_support.py -> build/bdist.linux-armv5tel/egg/setuptools
    104. copying build/lib/setuptools/__init__.py -> build/bdist.linux-armv5tel/egg/setuptools
    105. copying build/lib/setuptools/py31compat.py -> build/bdist.linux-armv5tel/egg/setuptools
    106. copying build/lib/setuptools/site-patch.py -> build/bdist.linux-armv5tel/egg/setuptools
    107. copying build/lib/setuptools/compat.py -> build/bdist.linux-armv5tel/egg/setuptools
    108. copying build/lib/setuptools/sandbox.py -> build/bdist.linux-armv5tel/egg/setuptools
    109. copying build/lib/setuptools/svn_utils.py -> build/bdist.linux-armv5tel/egg/setuptools
    110. copying build/lib/setuptools/py26compat.py -> build/bdist.linux-armv5tel/egg/setuptools
    111. copying build/lib/setuptools/script.tmpl -> build/bdist.linux-armv5tel/egg/setuptools
    112. copying build/lib/setuptools/py27compat.py -> build/bdist.linux-armv5tel/egg/setuptools
    113. creating build/bdist.linux-armv5tel/egg/setuptools/tests
    114. copying build/lib/setuptools/tests/script-with-bom.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    115. copying build/lib/setuptools/tests/test_build_ext.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    116. copying build/lib/setuptools/tests/test_integration.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    117. copying build/lib/setuptools/tests/test_upload_docs.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    118. copying build/lib/setuptools/tests/test_egg_info.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    119. copying build/lib/setuptools/tests/test_sdist.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    120. copying build/lib/setuptools/tests/test_bdist_egg.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    121. copying build/lib/setuptools/tests/test_svn.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    122. copying build/lib/setuptools/tests/__init__.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    123. copying build/lib/setuptools/tests/test_packageindex.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    124. copying build/lib/setuptools/tests/test_easy_install.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    125. copying build/lib/setuptools/tests/server.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    126. copying build/lib/setuptools/tests/environment.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    127. copying build/lib/setuptools/tests/test_develop.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    128. copying build/lib/setuptools/tests/test_resources.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    129. copying build/lib/setuptools/tests/py26compat.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    130. copying build/lib/setuptools/tests/test_dist_info.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    131. copying build/lib/setuptools/tests/test_test.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    132. copying build/lib/setuptools/tests/test_markerlib.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    133. copying build/lib/setuptools/tests/test_find_packages.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    134. copying build/lib/setuptools/tests/test_sandbox.py -> build/bdist.linux-armv5tel/egg/setuptools/tests
    135. copying build/lib/setuptools/archive_util.py -> build/bdist.linux-armv5tel/egg/setuptools
    136. copying build/lib/setuptools/unicode_utils.py -> build/bdist.linux-armv5tel/egg/setuptools
    137. creating build/bdist.linux-armv5tel/egg/setuptools/command
    138. copying build/lib/setuptools/command/alias.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    139. copying build/lib/setuptools/command/install.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    140. copying build/lib/setuptools/command/egg_info.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    141. copying build/lib/setuptools/command/develop.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    142. copying build/lib/setuptools/command/sdist.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    143. copying build/lib/setuptools/command/test.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    144. copying build/lib/setuptools/command/__init__.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    145. copying build/lib/setuptools/command/register.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    146. copying build/lib/setuptools/command/easy_install.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    147. copying build/lib/setuptools/command/bdist_egg.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    148. copying build/lib/setuptools/command/install_scripts.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    149. copying build/lib/setuptools/command/setopt.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    150. copying build/lib/setuptools/command/saveopts.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    151. copying build/lib/setuptools/command/build_py.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    152. copying build/lib/setuptools/command/install_egg_info.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    153. copying build/lib/setuptools/command/bdist_rpm.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    154. copying build/lib/setuptools/command/build_ext.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    155. copying build/lib/setuptools/command/install_lib.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    156. copying build/lib/setuptools/command/bdist_wininst.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    157. copying build/lib/setuptools/command/upload_docs.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    158. copying build/lib/setuptools/command/rotate.py -> build/bdist.linux-armv5tel/egg/setuptools/command
    159. creating build/bdist.linux-armv5tel/egg/_markerlib
    160. copying build/lib/_markerlib/markers.py -> build/bdist.linux-armv5tel/egg/_markerlib
    161. copying build/lib/_markerlib/__init__.py -> build/bdist.linux-armv5tel/egg/_markerlib
    162. byte-compiling build/bdist.linux-armv5tel/egg/pkg_resources.py to pkg_resources.pyc
    163. byte-compiling build/bdist.linux-armv5tel/egg/easy_install.py to easy_install.pyc
    164. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/dist.py to dist.pyc
    165. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/version.py to version.pyc
    166. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/extension.py to extension.pyc
    167. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/package_index.py to package_index.pyc
    168. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/lib2to3_ex.py to lib2to3_ex.pyc
    169. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/depends.py to depends.pyc
    170. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/ssl_support.py to ssl_support.pyc
    171. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/__init__.py to __init__.pyc
    172. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/py31compat.py to py31compat.pyc
    173. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/site-patch.py to site-patch.pyc
    174. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/compat.py to compat.pyc
    175. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/sandbox.py to sandbox.pyc
    176. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/svn_utils.py to svn_utils.pyc
    177. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/py26compat.py to py26compat.pyc
    178. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/py27compat.py to py27compat.pyc
    179. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/script-with-bom.py to script-with-bom.pyc
    180. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_build_ext.py to test_build_ext.pyc
    181. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_integration.py to test_integration.pyc
    182. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_upload_docs.py to test_upload_docs.pyc
    183. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_egg_info.py to test_egg_info.pyc
    184. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_sdist.py to test_sdist.pyc
    185. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_bdist_egg.py to test_bdist_egg.pyc
    186. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_svn.py to test_svn.pyc
    187. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/__init__.py to __init__.pyc
    188. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_packageindex.py to test_packageindex.pyc
    189. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_easy_install.py to test_easy_install.pyc
    190. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/server.py to server.pyc
    191. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/environment.py to environment.pyc
    192. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_develop.py to test_develop.pyc
    193. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_resources.py to test_resources.pyc
    194. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/py26compat.py to py26compat.pyc
    195. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_dist_info.py to test_dist_info.pyc
    196. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_test.py to test_test.pyc
    197. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_markerlib.py to test_markerlib.pyc
    198. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_find_packages.py to test_find_packages.pyc
    199. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/tests/test_sandbox.py to test_sandbox.pyc
    200. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/archive_util.py to archive_util.pyc
    201. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/unicode_utils.py to unicode_utils.pyc
    202. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/alias.py to alias.pyc
    203. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/install.py to install.pyc
    204. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/egg_info.py to egg_info.pyc
    205. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/develop.py to develop.pyc
    206. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/sdist.py to sdist.pyc
    207. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/test.py to test.pyc
    208. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/__init__.py to __init__.pyc
    209. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/register.py to register.pyc
    210. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/easy_install.py to easy_install.pyc
    211. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/bdist_egg.py to bdist_egg.pyc
    212. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/install_scripts.py to install_scripts.pyc
    213. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/setopt.py to setopt.pyc
    214. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/saveopts.py to saveopts.pyc
    215. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/build_py.py to build_py.pyc
    216. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/install_egg_info.py to install_egg_info.pyc
    217. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/bdist_rpm.py to bdist_rpm.pyc
    218. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/build_ext.py to build_ext.pyc
    219. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/install_lib.py to install_lib.pyc
    220. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/bdist_wininst.py to bdist_wininst.pyc
    221. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/upload_docs.py to upload_docs.pyc
    222. byte-compiling build/bdist.linux-armv5tel/egg/setuptools/command/rotate.py to rotate.pyc
    223. byte-compiling build/bdist.linux-armv5tel/egg/_markerlib/markers.py to markers.pyc
    224. byte-compiling build/bdist.linux-armv5tel/egg/_markerlib/__init__.py to __init__.pyc
    225. creating build/bdist.linux-armv5tel/egg/EGG-INFO
    226. copying setuptools.egg-info/PKG-INFO -> build/bdist.linux-armv5tel/egg/EGG-INFO
    227. copying setuptools.egg-info/SOURCES.txt -> build/bdist.linux-armv5tel/egg/EGG-INFO
    228. copying setuptools.egg-info/dependency_links.txt -> build/bdist.linux-armv5tel/egg/EGG-INFO
    229. copying setuptools.egg-info/entry_points.txt -> build/bdist.linux-armv5tel/egg/EGG-INFO
    230. copying setuptools.egg-info/requires.txt -> build/bdist.linux-armv5tel/egg/EGG-INFO
    231. copying setuptools.egg-info/top_level.txt -> build/bdist.linux-armv5tel/egg/EGG-INFO
    232. copying setuptools.egg-info/zip-safe -> build/bdist.linux-armv5tel/egg/EGG-INFO
    233. creating dist
    234. creating 'dist/setuptools-5.7-py2.6.egg' and adding 'build/bdist.linux-armv5tel/egg' to it
    235. removing 'build/bdist.linux-armv5tel/egg' (and everything under it)
    236. Processing setuptools-5.7-py2.6.egg
    237. Copying setuptools-5.7-py2.6.egg to /share/MD0_DATA/.qpkg/Optware/local/lib/python2.6/site-packages
    238. Adding setuptools 5.7 to easy-install.pth file
    239. Installing easy_install script to /opt/local/bin
    240. Installing easy_install-2.6 script to /opt/local/bin
    241. Installed /share/MD0_DATA/.qpkg/Optware/local/lib/python2.6/site-packages/setuptools-5.7-py2.6.egg
    242. Processing dependencies for setuptools==5.7
    243. Finished processing dependencies for setuptools==5.7
    Alles anzeigen