Hallo zusammen,
mein altes TS 879 Pro+ hatte vor ein paar Tagen eine Platte mit SMART Fehlern und dem Zustand Normal WD RE 4TB WD4000FYYZ ich hab diese gegen eine WD Gold 4TB WD4003FRYZ ausgetauscht. Der Rebuild ist gestartet und lief zwar langsam aber stätig. Hatte gestern Abend nach etwa 3 Tagen 35% Rebuild durch. Leider ist das System dann gestern Nacht durchgestartet. Stromausfall ist ausgeschlossen, da es an einer USV hängt, die mir einen Fehler protokolliert hätte.
Nun sind die Freigabeordner nicht mehr verfügbar weil das RAID 6 im Speichermanager zwar sichtbar ist, aber nicht eingehängt. Der erste Versuch das Raid über die GUI per Wiederherstellen zu beleben scheiterte mit "Raid Recovery failed.
Nun habe ich mich per SSH verbunden:
# mount
/proc on /proc type proc (rw)
none on /dev/pts type devpts (rw,gid=5,mode=620)
sysfs on /sys type sysfs (rw)
tmpfs on /tmp type tmpfs (rw,size=64M)
tmpfs on /dev/shm type tmpfs (rw)
tmpfs on /share type tmpfs (rw,size=16M)
none on /proc/bus/usb type usbfs (rw)
/dev/sda4 on /mnt/ext type ext3 (rw)
/dev/md9 on /mnt/HDA_ROOT type ext3 (rw,data=ordered)
tmpfs on /samba type tmpfs (rw,size=64M)
tmpfs on /mnt/rf/nd type tmpfs (rw,size=1m)
none on /sys/kernel/config type configfs (rw)
Alles anzeigen
/dev/md0 ist nicht nach /share/MD0_DATA eingehangen
mdam bringt für md0 auch keine infos
# e2fsck_64 -fp -C 0 /dev/md0
e2fsck_64: Invalid argument while trying to open /dev/md0
/dev/md0:
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
Dateisystemcheck auf md0 ist erfolglos
# cat /proc/mdstat
Personalities : [linear] [raid0] [raid1] [raid10] [raid6] [raid5] [raid4] [multipath]
md8 : active raid1 sdf2[6](S) sde2[5](S) sdd2[4](S) sdc2[3](S) sdb2[2] sda2[0]
530128 blocks super 1.0 [2/2] [UU]
md13 : active raid1 sda4[0] sdd4[5] sde4[8] sdf4[7] sdc4[9] sdb4[3]
458880 blocks super 1.0 [8/6] [UUUUUU__]
bitmap: 7/8 pages [28KB], 32KB chunk
md9 : active raid1 sda1[0] sdf1[12] sde1[11] sdd1[10] sdc1[9] sdb1[8]
530112 blocks super 1.0 [8/6] [UUUUUU__]
bitmap: 8/9 pages [32KB], 32KB chunk
unused devices: <none>
Alles anzeigen
mdstat bringt die obrige Ausgabe
# e2fsck_64 -fp -C 0 /dev/md0
e2fsck_64: Invalid argument while trying to open /dev/md0
/dev/md0:
The superblock could not be read or does not describe a valid ext2/ext3/ext4
filesystem. If the device is valid and it really contains an ext2/ext3/ext4
filesystem (and not swap or ufs or something else), then the superblock
is corrupt, and you might try running e2fsck with an alternate superblock:
e2fsck -b 8193 <device>
or
e2fsck -b 32768 <device>
Filesystem Check auf md0 ist nicht möglich
Hat jemand eine Idee wie ich hie über die Shell weiter komme und das RAID wieder zum laufen bekomme?
Ich habe in einem Forum noch ein ähnliches Thema gefunden bei dem jemand ein RAID 5 mit 4 Platten nach einem ähnlichen "Rebuild failed" wieder an den Start gebracht hat, schreibt aber nicht dazu, ob die Daten noch da waren mit dem madam --create Kommando