Energiesparmodus

  • Hallo,
    meine Festplatten in der TVS-682 sind weniger laut wenn ich länger keinen Zugriff darauf habe.
    Wenn ich dann wieder daten abrufe höre ich es deutlich wenn die festplatten auf ihre volle umdrehungsgeschwindigkeit hochfahren.


    Wie kann ich das ausschalten?


    Es ist kein Energiesparplan angelegt!


    danke

  • Wo finde ich diese Funktion?
    Betriebslautstärke ist nicht wichtig. die nas steht im 19-zoll-schrank im keller.

  • http://docs.qnap.com/nas/4.3/cat2/en/index.html
    Go to "Control Panel" > "System Settings" > "Hardware" to configure the NAS hardware functions.


    Enable hard disk standby mode: This option allows the NAS drives to enter standby mode if there is no disk access within the specified period. Note that during standby mode, the system LED on the NAS will be off but the HDD status LED will remain steady.