NAS startet nicht mehr Zugriff Festplatte nur über SSH

    Ich habe QNAP TS 219 PII mit 2 Festplatten 4 TB
    Nach dem letzten Firmwareupdate bootet der Nas nicht mehr.
    Ohne Festplatten startet er und ich habe nach dem Start und einschieben der Platten über SSH Zugriff über

    Code
    #> config_util 1#> storage_boot_init 1#> storage_boot_init 2#> cd /share/MD0_DATA

    auf die Daten MD0_DATA
    Alle Daten sind noch vorhanden. Das Firmware recover funktioniert nicht.


    storage boot_init 2 zeigt ebenfalls ein paar Fehler
    hier das Log

    Code
    [//] # config_util 1Start to mirror ROOT part...config_util: HD1 config Match serial_no of HD1.config_util: HD2 config Match serial_no of HD2.mdadm: /dev/md9 has been started with 1 drive (out of 2).Mirror of ROOT succeeded.[//] # storage_boot_init 1storage_boot_init 1 ...[//] # mdadm: Defaulting to version 1.-1 metadatamdadm: /dev/sdb2 appears to be part of a raid array:level=raid1 devices=2 ctime=Tue Jun 13 11:50:49 2017mdadm: array /dev/md2 started.storage_boot_init 2storage_boot_init 2 ...mdadm: /dev/md0 not identified in config file.mdadm: stopped /dev/md0mdadm: /dev/md0 has been started with 1 drive (out of 2).storage_boot_init.c: Start raid device /dev/md0 successfullystorage_boot_init.c: /dev/sda is R/W Error.md0 : active raid1 sdb3[1]storage_boot_init.c: /dev/md0 is active.storage_boot_init.c: Check filesystem on /dev/md0.sh: /sbin/smbtools: No such file or directorymd5sum: /etc/config/proftpd.conf: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/smbtools: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/smbtools: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/smbtools: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/smbtools: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/smbtools: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/smbtools: No such file or directorysh: /sbin/qsyncsrv_util: No such file or directorysh: /sbin/smbtools: No such file or directoryRestore default shares on vol[1]storage_boot_init.c: check_last_degrade_error...[//] #[//] # cd /share/MD0_DATA

    Der Befehl  df

    Code
    Filesystem Size Used Available Use% Mounted on
/dev/ram 32.9M 32.9M 0 100% /
tmpfs 64.0M 100.0k 63.9M 0% /tmp
tmpfs 64.0M 38.7M 25.3M 60% /tunnel_agent
/dev/md9 509.5M 128.7M 380.8M 25% /mnt/HDA_ROOT
/dev/md0 2.7T 157.6G 2.5T 6% /share/MD0_DATA

    zeigt ramdisk ist voll.